DISA India inaugurates 8,000 sq metre Tumkur plant expansion
Key highlights
- DISA India inaugurated its Tumkur greenfield manufacturing expansion on November 12, 2026.
- The new facility adds over 8,000 square metres alongside existing Tumkur operations.
- DISA India will manufacture equipment and solutions for 4 Norican brands at the new site.
- The facility will serve domestic and international markets, with no output or revenue target disclosed.
powered by IRIS

DISA India Limited inaugurated a greenfield manufacturing expansion of over 8,000 square metres in Tumkur, Karnataka, on November 12, 2026, creating capacity to manufacture equipment and solutions for four Norican technology brands for domestic and international markets. The facility has been added alongside DISA India’s existing Tumkur operations.
Know Disa India inside out
Results, valuation, peers and who's buying, in one view.
What did DISA India inaugurate in Tumkur?
DISA India inaugurated a new greenfield manufacturing facility in Tumkur, Karnataka, on November 12, 2026, adding over 8,000 square metres of manufacturing space beside its existing facility. The announcement describes the project as an expansion of Norican’s Indian manufacturing footprint rather than a replacement for the established Tumkur operations.
The new facility is part of a Tumkur site that DISA India says has evolved over more than four decades into a manufacturing and engineering hub. The existing operations serve customers in India and support Norican’s worldwide operations, while the additional 8,000-plus square metres are intended to add manufacturing capacity at the same location.
The disclosed comparison is between the established Tumkur operations and an incremental addition of over 8,000 square metres. DISA India did not disclose the area of the prior facility, the combined site area or a percentage increase in capacity, so the announcement does not support a numerical estimate of output growth.
The inauguration was attended by Norican President and Chief Executive Officer Ulla Hartvig Tønnesen, Peter Winther Schmidt, Consul General and Head of Trade and Innovation at the Embassy of Denmark in India, and DISA India directors, customers, employees and business partners. The event confirms that the new manufacturing location was inaugurated on November 12, 2026, while the accompanying press release was filed with BSE Limited on November 16, 2026.
Which Norican brands will DISA India make in Tumkur?
DISA India will manufacture equipment and solutions for all four Norican technology brands at the new Tumkur facility: DISA, Wheelabrator, Simpson and StrikoWestofen. The four-brand remit is the specific product scope disclosed for the greenfield facility inaugurated on November 12, 2026.
The facility will serve domestic and international markets, according to the announcement. This gives the added 8,000-plus square metres two stated market destinations: Indian customers and overseas markets supported through Norican’s global manufacturing and supply network.
Compared with the earlier description of Tumkur as a manufacturing and engineering hub, the November 2026 announcement defines the new facility’s scope across four named Norican brands. DISA India did not provide a before-and-after product breakdown for the existing site, individual production volumes for the brands or a timetable for production by each brand.
The release also does not state the division of output between domestic and international markets. While the facility is intended to serve both segments, no export share, list of overseas markets, customer order volume or annual equipment capacity was disclosed for the additional manufacturing area.
Got a follow-up? Ask IRIS
How does the Tumkur expansion fit Norican’s India plan?
DISA India says the Tumkur expansion is a key part of Norican’s continued investment and expansion in India, which Norican identifies as a strategically important market and key growth region. Management said the November 12, 2026 inauguration demonstrates a long-term commitment to India and confidence in the country’s manufacturing potential.
The mechanism stated by Norican is the consolidation of capabilities at Tumkur. By bringing manufacturing for the four brands together at the Karnataka location, Norican aims to strengthen local manufacturing capabilities, enhance operational efficiencies and improve responsiveness to customers in India and international markets.
Norican’s stated goal also extends to its worldwide supply network. DISA India’s pre-expansion Tumkur operations already supported Norican’s global activities, and the new 8,000-plus square metres are intended to reinforce India’s contribution to that network while serving domestic demand.
Tønnesen said continued investments in technology, innovation, manufacturing excellence and sustainable growth are intended to improve Norican’s ability to support customers in India and globally. The November 2026 announcement does not disclose a capital expenditure amount, output target, operating-cost target, delivery-time target or sustainability metric for the facility.
What operational changes does DISA India expect from the facility?
DISA India expects the added capacity and enhanced capabilities at the 8,000-plus-square-metre facility to provide greater flexibility in responding to changing customer requirements. Managing Director and Chief Executive Officer Lokesh Saxena said the expansion is intended to support the company’s growth ambitions and its service to markets worldwide.
The reported operational change is capacity-led: a new manufacturing facility has been added beside the existing Tumkur operation, with equipment and solutions planned for four Norican brands. DISA India also cites operational efficiency and customer responsiveness as objectives, but it does not quantify throughput, utilisation, lead times, backlog or revenue contribution.
Management also linked the November 2026 expansion to employees and the local manufacturing ecosystem. Saxena said the facility creates opportunities for people and strengthens the local ecosystem, while Tønnesen referred to opportunities for employees and the wider manufacturing ecosystem.
No jobs figure, recruitment timetable, supplier-spending commitment or workforce total was included in the release. Similarly, DISA India did not disclose a commissioning ramp-up schedule, investment value, profit forecast or sales guidance, leaving the financial and employment effects of the added manufacturing space unresolved.
Conclusion
DISA India’s November 12, 2026 inauguration adds over 8,000 square metres of greenfield manufacturing space beside its established Tumkur facility and assigns the new site equipment and solutions for DISA, Wheelabrator, Simpson and StrikoWestofen. The expansion broadens the stated role of Tumkur across domestic and international markets within Norican’s manufacturing network.
What to watch next is whether DISA India discloses the ramp-up of production, output allocated to domestic and international markets, employment additions or financial contribution from the new facility. Management has stated plans for greater flexibility, improved responsiveness and operational efficiencies, but the November 2026 release provides no timeline or quantified target for those outcomes.


