Ajwa Projects Limited combines fabrication with full-site execution
Key highlights
- Ajwa Projects reported Rs 48.4238 crore of FY 2025-26 revenue, up 31.83% from Rs 36.7311 crore in FY 2024-25.
- Ajwa Projects had 27 active sites and 10 completed projects as of March 31, 2026.
- EBITDA increased to Rs 9.0342 crore in FY 2025-26 from Rs 6.4104 crore, while the EBITDA margin rose to 18.66% from 17.45%.
- Gujarat generated 93.96% of FY 2025-26 revenue, while private customers contributed 99.58% and government customers 0.42%.
powered by IRIS

Ajwa Projects Limited is not solely a workshop fabricator: it executes industrial work from raw-material procurement and fabrication through on-site erection, testing, handover and post-completion support. The model produced Rs 48.4238 crore of revenue from operations in FY 2025-26, while the company reported 27 active sites at March 31, 2026.
How does Ajwa Projects combine fabrication with full-site execution?
Ajwa Projects combines fabrication with full-site execution by making components and then installing, aligning and integrating them at client locations. Its fabrication work includes machining, welding and assembly of steel and other structural materials into industrial buildings, girders, heavy modules, platforms, crane girders and specialised components. The company also makes pressure vessels, boilers, heat exchangers, tanks, chimneys, ducts, ladles and blast-furnace components for industries including steel, power, oil and gas, and refineries.
The on-site portion extends the workshop role into a completed industrial asset. Ajwa Projects erects fabricated structures, equipment and piping systems, with work involving heavy-structure handling, module assembly and connection of auxiliary systems. Its civil scope includes site preparation, earthworks, concreting, foundations for heavy machinery, factory buildings, silos, tanks and related supporting works. This combination means an assignment can encompass structural foundations, fabricated components and final operational readiness rather than a single fabrication stage.
Piping is a further link between fabrication and installation. Ajwa Projects fabricates and erects process and utility piping for fluids, gases, steam and chemicals; where required, it manufactures pipes from raw materials before welding, fitting and assembling them into sections for site installation. The company also constructs and installs heavy-duty vessels and tanks, then offers maintenance, repair and lifecycle services for high-risk applications in oil and gas, refinery, steel and power facilities.
How does Ajwa Projects move an order from bid to handover?
Ajwa Projects uses a 10-stage process that starts with technical and financial bidding and ends with post-completion support. After receiving and accepting a work order or letter of intent, the company reviews the scope, timing, technical specifications and compliance requirements. It then prepares work-breakdown structures, deploys manpower, schedules activity, allocates equipment and reviews client drawings before procuring steel, pipes, welding consumables and other approved inputs.
Fabrication can take place at the Surat workshop or at a client site, depending on the project’s scope and technical requirements. Components made under controlled workshop conditions can be transported for assembly and erection, while some structures, piping sections, equipment and prefabricated modules are made directly on site. The workshop is at Ichchapore, Surat, and the disclosed facilities include a welding and grinding area, open fabrication yard, blasting and priming area, painting area and ducting line.
Quality checks apply from procurement through commissioning. Ajwa Projects lists non-destructive testing, or NDT, pressure testing, pressure safety valve calibration and trial runs among the checks used to confirm compliance with client specifications, industry codes and statutory standards. Completion requires dispatch or commissioning, handover documentation, quality records and completion certificates; billing is based on measurement books, client approvals and progress records. Maintenance and corrective work may follow handover according to client requirements.
What projects demonstrate Ajwa Projects' multi-stage delivery model?
Ajwa Projects’ disclosed completed projects show that its work has included fabrication-only tasks as well as assignments combining fabrication, erection, alignment, testing and commissioning. A 2024 Angul project in Odisha covered fabrication, erection, alignment, testing and commissioning of shell works and had a value of Rs 4.8339 crore. By comparison, the Chenab Rail Bridge assignment in Jammu and Kashmir combined fabrication, assembly and erection work and was completed in 2023 at Rs 8.9667 crore.
The ongoing-project list also includes separate fabrication, erection and civil assignments, supporting the stated breadth of the model. The prospectus labels this list as ongoing as of September 30, 2025, although the table includes work orders dated through September 2026. The disclosed entries therefore demonstrate the types and stated values of work, but the dates in the table should be read with that inconsistency in mind.
The project range spans industrial and infrastructure applications rather than one end market. Completed assignments include a Rs 9.3377 crore Mumbai Trans Harbour Link package completed in 2024, a Rs 3.50 crore duct-ventilation project at Kakrapar Atomic Power Project completed between 2019 and 2022, and a Rs 8 crore Jamnagar assignment undertaken from 2013 to 2017 that included steel-structure fabrication, erection, piping, equipment installation, alignment and commissioning.
Got a follow-up? Ask IRIS
What scale and concentration shape Ajwa Projects' operating model?
Ajwa Projects’ revenue rose to Rs 48.4238 crore in FY 2025-26 from Rs 36.7311 crore in FY 2024-25, a reported increase of 31.83%; FY 2024-25 revenue had increased 7.20% from Rs 34.2654 crore in FY 2023-24. Earnings before interest, tax, depreciation and amortisation, or EBITDA, increased from Rs 6.4104 crore in FY 2024-25 to Rs 9.0342 crore in FY 2025-26, while the EBITDA margin increased from 17.45% to 18.66%.
The business is entirely domestic in the disclosed periods: domestic revenue accounted for 100% of revenue in FY 2024-25 and FY 2025-26, with no export revenue reported. Gujarat generated 93.96% of FY 2025-26 revenue, up from 80.26% in FY 2024-25. Private customers contributed 99.58% of FY 2025-26 revenue, while government customers contributed 0.42%.
Customer concentration also increased in FY 2025-26. The top five customers accounted for 63.89% of sales in FY 2025-26, compared with 56.63% in FY 2024-25, and the top 10 represented 86.65%, compared with 78.03%. As of June 30, 2026, a period not annualised, the top five customers represented 85.40% and the top 10 represented 98.52% of sales; the company reported 38 active sites and 557 skilled, semi-skilled and supervisory personnel.
What must hold for Ajwa Projects' full-site execution model to continue?
Ajwa Projects’ model depends on converting awarded work into coordinated procurement, workshop or on-site fabrication, safe erection, inspection and accepted handover. Its process identifies timely supply of steel, structural sections, pipes and welding consumables, as well as vendor evaluation and logistics planning, as necessary inputs. It also requires manpower and equipment allocation to match approved drawings, schedules and work-breakdown structures across site locations.
The disclosed figures show why execution across customers and locations remains material. Operating cash flow was negative Rs 2.8764 crore in FY 2025-26 after positive Rs 4.1753 crore in FY 2024-25, while total debt rose to Rs 12.5219 crore from Rs 7.9585 crore. The company’s ability to sustain its integrated scope is therefore tied to completing measured work, securing client approvals and documentation for billing, and maintaining the quality and safety checks specified for commissioning.
Conclusion
Ajwa Projects operates as an industrial execution company with fabrication at its centre, rather than as a pure-play fabricator. Its scope joins workshop and site work, including structural fabrication, piping, erection, civil construction, pressure equipment, testing, handover and maintenance; FY 2025-26 revenue of Rs 48.4238 crore and 27 active sites indicate the reported scale of that model.
The next disclosed indicators to watch are the conversion of the listed balance work into completion and billing, the company’s stated post-completion maintenance activity, and customer concentration. The prospectus also reports 38 active sites for the non-annualised quarter ended June 30, 2026 and a top-five customer contribution of 85.40%, later data points that can show how the project mix and customer dependence develop.


