Maxwell Engineering Solutions Limited Capitalises Rs 1.5169 Crore R&D
Key highlights
- Maxwell capitalised Rs 1.5169 crore of R&D expenditure as an intangible asset under development in Fiscal 2026.
- Maxwell's Fiscal 2026 R&D programme covered 9 projects, including oil-heated, carbide-tipped and larger-format die plates.
- The company reported 71 employees in departmental roles as of September 30, 2026, including 3 in Design and 5 in Quality and Testing.
- Maxwell disclosed an export obligation of Rs 13.0963 crore, or USD 15,21,052.26, to be fulfilled within 6 years.
powered by IRIS

Maxwell Engineering Solutions Limited capitalised Rs 1.5169 crore of research and development (R&D) expenditure in Fiscal 2026 as an intangible asset under development, after reporting nil R&D expense in Fiscal 2025 and Fiscal 2024. The Fiscal 2026 work covered nine projects, including oil-heated, carbide-tipped and larger-format pelletizing die plates.
Why did Maxwell capitalise Rs 1.5169 crore of Fiscal 2026 R&D?
Maxwell capitalised its Fiscal 2026 R&D expenditure because the Rs 1.5169 crore spent on development work was treated as an intangible asset under development. In Fiscal 2024 and Fiscal 2025, product activities were at the research and evaluation stage, and related expenditure was charged to the statement of profit and loss as revenue expenditure because the company said there was no basis for capitalisation under applicable accounting principles.
The reported treatment changed in Fiscal 2026, while the R&D expense table moved from nil in each of the preceding two fiscal years to Rs 1.5169 crore. The disclosure does not state when the intangible asset under development will be completed, commercialised, amortised or assessed for impairment.
What products did Maxwell develop through Fiscal 2026 R&D?
Maxwell conducted development work across nine Fiscal 2026 projects spanning oil-heated die plates, carbide-tipped plates, large-format plates and cutting blades for large die plates. Its stated R&D project was the D-500 oil-heated pelletizing die plate, measuring 720 x 102 millimetres, for pelletizing systems used in graphite-based polystyrene extrusion processing in Europe and cold-climate countries.
A die plate is a precision component in an underwater pelletizing system, which converts processed polymers into pellets. Maxwell said the D-500 720 x 102 millimetre project was successful and prompted an experiment on a 845 x 100 millimetre D-500 plate, intended to extend the design to a larger plate diameter. The larger version remains an experiment, so its progress depends on successful scaling beyond the stated development stage.
Maxwell also developed two carbide-tipped Ferro-TIC plates, the SP-70 and SP-100. The company said trials moved from TIC-128 to TIC-Nicrodur and finally Ferro-TIC, with the aim of improving hardness and plate life without affecting other characteristics. It did not disclose measured changes in hardness, useful life, selling price, orders or revenue.
How does Maxwell's R&D programme broaden its die-plate range?
Maxwell's Fiscal 2026 programme broadens its development work towards oil-heated, carbide-tipped and larger-format die plates, as well as large blades to be installed on large die plates. The company is also testing a vacuum-based design for the standard SP-100 plate instead of the air-gap design used previously.
Maxwell said the air-gap design increased back pressure, causing uneven temperature distribution and frequent hole freezing. The vacuum-based work is intended to address those stated operating issues, but the disclosure gives no test result for the alternative design. Commercial use would therefore depend on the design resolving the cited issues while retaining required product characteristics.
The company also identified smaller hole sizes, down to 0.6 millimetres, and large-format plates as a higher-value segment with limited competition. This is a product-positioning statement, not a reported sales category: Maxwell disclosed no Fiscal 2026 revenue, unit volumes, margins or order book for oil-heated, carbide-tipped, 0.6-millimetre or large-format products.
Got a follow-up? Ask IRIS
Does Maxwell's development work support import substitution?
Maxwell says the D-500 oil-heated die plate presents an import-substitution opportunity because high-precision die plates for graphite-polystyrene pelletizing have largely been imported from European manufacturers. The company says a locally engineered product to comparable specifications could address that segment and place Maxwell among a limited number of Asian manufacturers able to serve it.
The identified use case is specific to graphite-based polystyrene extrusion processors in Europe and cold-climate countries, rather than the full polymer-processing market. Maxwell also disclosed an export obligation of Rs 13.0963 crore, equivalent to USD 15,21,052.26, to be fulfilled within six years. The disclosure does not identify what portion, if any, of that obligation could be met by the new R&D products.
Maxwell said completed projects create design baselines, proven process parameters, tooling and supplier relationships that could reduce the cost and time of developing variants with different hole counts, sizes or polymers. That is the company's stated capability rationale, not a quantified cost saving. The benefit depends on the designs being reproducible across variants and on demand from original equipment manufacturers, or OEMs, which are equipment makers.
What resources support Maxwell's R&D programme?
Maxwell's R&D unit is integrated with its manufacturing facility and draws on employees from the Design, Operations and Quality Control teams. Rajkumar Chaudhary, chairman and managing director, leads the team and, according to the company, contributed directly through technical expertise and personal involvement.
Maxwell reported 71 employees in its departmental count as of September 30, 2026, excluding directors. That total included 41 employees in Production and Operation, three in Design and five in Quality and Testing. Separately, the company reported 108 employees, comprising 71 permanent and 37 contractual staff, compared with 104 employees as of June 30, 2026.
Maxwell holds ISO 9001:2015 certification for manufacturing and supplying die plates and heads, pelletizing blades and knives, blade holders and tapped driving bushes. It also received ZED Bronze Certification under the Micro, Small and Medium Enterprises Sustainable certification scheme on November 28, 2025. These credentials describe management and sustainability standards, rather than certifying performance or market acceptance of the nine Fiscal 2026 R&D projects.
Conclusion
Maxwell's Rs 1.5169 crore R&D capitalisation in Fiscal 2026 marks a reported change from nil R&D expense in Fiscal 2024 and Fiscal 2025. The programme combines the 720 x 102 millimetre oil-heated D-500 plate, an 845 x 100 millimetre scale-up experiment, Ferro-TIC carbide-tipped plates and design work intended to address back pressure, uneven temperature distribution and hole freezing.
The next disclosed developments to watch are the 845 x 100 millimetre D-500 experiment and the vacuum-based SP-100 design. Maxwell says the completed work is generating OEM enquiries, but it has not disclosed orders, revenue, quantified product-performance results or a completion timetable for the Rs 1.5169 crore intangible asset under development.


