Midwest Energy Limited wins conditional 1,200-MTPA magnet LOI
Key highlights
- Midwest Energy received a conditional LOI on 19 November 2026 for a 1,200-MTPA rare earth permanent magnet project.
- Midwest Energy quoted a sales incentive rate of Rs 505.05 per kg under the Rs 7,280 crore REPM scheme.
- Midwest Energy must provide Rs 40 crore of performance security within 90 days before a final award can be issued.
- Midwest Energy’s Hyderabad magnet Phase-I plant has 500 TPA capacity, and its stated target is 1,500 MTPA by end-2027.
powered by IRIS

Midwest Energy received a conditional Letter of Intent on 19 November 2026 for a 1,200-metric-tonnes-per-annum sintered rare earth permanent magnet project under the Rs 7,280 crore central scheme, quoting a sales incentive rate of Rs 505.05 per kg and requiring Rs 40 crore of performance security.
Know Midwest Energy inside out
Results, valuation, peers and who's buying, in one view.
What did Midwest Energy win under the REPM scheme?
Midwest Energy was declared the successful bidder for a 1,200 metric tonnes per annum, or MTPA, rare earth permanent magnet manufacturing project and received a Letter of Intent, or LOI, from the Ministry of Heavy Industries. The selection is under the Government of India’s Rs 7,280 crore Scheme to Promote Manufacturing of Sintered Rare Earth Permanent Magnets, or REPM.
The LOI records Midwest Energy’s quoted sales incentive rate at Rs 505.05 per kg for the 1,200-MTPA project. This is not a final Letter of Award because the company must meet conditions in the scheme and the Request for Proposal, or RFP. The 19 November 2026 filing therefore confirms successful-bidder status and a conditional route to an award, rather than an operational plant.
The selected project concerns sintered REPM manufacturing, including sintered Neodymium-Iron-Boron, or NdFeB, magnets. The Government says the Rs 7,280 crore scheme is intended to develop domestic magnet manufacturing and reduce dependence on imports, while Midwest Energy says the LOI supports its plans to establish a presence in this sector.
What must Midwest Energy do before receiving the final award?
Midwest Energy must submit Rs 40 crore in performance security within 90 days of receiving the LOI before the Government can issue a Letter of Award. The filing says the award will be issued only after the Government is satisfied that the requirements of the REPM scheme and RFP have been fulfilled.
The Rs 40 crore requirement is a performance security, not a disclosed investment in machinery or construction. Midwest Energy did not state whether it has submitted the security, and it did not provide an LOI receipt date other than the 19 November 2026 announcement date. It also did not disclose a commissioning deadline for the selected 1,200-MTPA project.
The company disclosed neither the duration of the Rs 505.05-per-kg incentive nor the sales volumes that could qualify for it. The announcement also gives no project cost for the 1,200-MTPA award, expected aggregate incentive amount, customer contracts, feedstock arrangements or production schedule. Those details remain unresolved while the LOI conditions are outstanding.
How does the 1,200-MTPA LOI compare with Midwest Energy’s capacity plan?
The 1,200-MTPA LOI capacity is 700 tonnes per annum above Midwest Energy’s 500-TPA Phase-I magnet plant and 300 tonnes per annum below its stated 1,500-MTPA capacity objective by the end of 2027. Tonnes per annum, or TPA, and MTPA both express annual capacity, making the figures comparable.
Midwest Energy said the 500-TPA Phase-I plant at its Hyderabad magnet facility is under commission. Against that initial phase, the 1,200-MTPA selected project is 2.4 times the stated Phase-I capacity. The company’s 1,500-MTPA end-2027 objective would be 1,000 TPA above the Phase-I level.
The filing does not say whether the 1,200-MTPA scheme project will form all or part of the 1,500-MTPA target. It also does not state whether the existing 500-TPA Phase-I capacity is included in that target or whether further capacity will be added at Hyderabad or another location. The 1,500-MTPA figure is a stated plan rather than reported operating capacity.
Got a follow-up? Ask IRIS
What manufacturing assets has Midwest Energy disclosed?
Midwest Energy has established a rare earth permanent magnet manufacturing facility in Hyderabad with Rs 250 crore of investment, where the 500-TPA Phase-I plant is under commission. The company describes this facility as part of an expansion intended to reach 1,500 MTPA by the end of 2027.
The filing does not specify whether the Rs 250 crore Hyderabad investment covers only the 500-TPA Phase-I plant or also later capacity additions. It also does not disclose output, revenue, customers or a completion date for the Phase-I plant. These omissions mean the Rs 250 crore investment cannot be directly allocated to the 1,200-MTPA LOI project from the information provided.
Separately, Midwest Energy disclosed a battery energy storage systems, or BESS, manufacturing facility in Bengaluru with annual capacity of 1.2 gigawatt-hours. That facility was established with an investment of approximately Rs 100 crore, distinct from the Rs 250 crore Hyderabad magnet facility and its 500-TPA Phase-I capacity.
Where could Midwest Energy’s proposed magnets be used?
Midwest Energy’s 1,200-MTPA project is intended to make rare earth permanent magnets, particularly sintered NdFeB magnets used in electric vehicle motors, wind turbines, electronics, aerospace and defence. The Rs 7,280 crore REPM scheme identifies domestic magnet manufacturing as the mechanism for reducing reliance on imported products.
Soumya Kollareddy, Whole-Time Director and Chief Executive Officer, said Midwest Energy is focused on developing indigenous manufacturing capabilities as its 500-TPA Hyderabad Phase-I plant progresses through commissioning. She cited electric mobility, renewable energy and other advanced industrial applications as areas with long-term opportunities, which is management’s view rather than a forecast of sales.
The announced 1,200-MTPA project aligns with the scheme’s domestic supply-chain objective, but the filing identifies no buyers or offtake agreements. It also gives no information on magnet grades, raw-material sourcing, pricing beyond the Rs 505.05-per-kg quoted incentive rate, or the volumes that Midwest Energy expects to sell into the identified applications.
Conclusion
Midwest Energy’s LOI establishes that it was the successful bidder for a 1,200-MTPA sintered rare earth permanent magnet project under the Rs 7,280 crore REPM scheme. The selection links a Rs 505.05-per-kg quoted sales incentive rate to a conditional award process, alongside the company’s Rs 250 crore Hyderabad magnet facility and its 500-TPA Phase-I plant under commission.
The next disclosed milestone is submission of Rs 40 crore in performance security within 90 days of the LOI receipt, followed by a Letter of Award if the Government is satisfied with the stipulated conditions. Beyond that award process, Midwest Energy’s disclosed operating target is 1,500 MTPA of magnet capacity by the end of 2027, while project timing, incentive realisation and commercial arrangements have not been disclosed.


