SMT Engineering Gets BSE Approval for ₹4 Crore Warrants
Key highlights
- BSE granted SMT Engineering in-principle approval on November 6, 2026 for 142,858 convertible warrants.
- The promoter preferential issue is priced at ₹280 per warrant and has an aggregate value of ₹4,00,00,240.
- Each warrant can convert into one ₹10 face-value equity share within a maximum of 18 months from allotment.
- The supplied disclosure estimated potential dilution from conversion at about 0.79%.
powered by IRIS

SMT Engineering Limited received BSE Limited's in-principle approval on November 6, 2026 to issue 142,858 convertible warrants to promoters at ₹280 each, aggregating ₹4.00 crore. The approval allows the company to proceed with the preferential issue, subject to applicable listing, allotment and regulatory requirements.
Know SMT Engineering inside out
Results, valuation, peers and who's buying, in one view.
What did BSE approve for SMT Engineering?
BSE approved in principle the proposed issue and allotment of 142,858 convertible warrants by SMT Engineering on a preferential basis. Each warrant can be converted into or exchanged for one fully paid-up equity share with a face value of ₹10.
The issue price is ₹280 per warrant and the total issue size is ₹4,00,00,240. BSE's approval was issued under Regulation 28(1) of the Securities and Exchange Board of India (Listing Obligations and Disclosure Requirements) Regulations, 2015. The exchange approval reference disclosed by the company is LOD/PREF/MV/FIP/1071/2026-27.
This is an in-principle approval rather than final listing approval. SMT Engineering must complete the remaining steps required for allotment and listing of the equity shares that may arise on conversion of the warrants.
How was the preferential warrant issue approved?
SMT Engineering's board approved the proposed warrant issue at its meeting held on September 3, 2026. The board approved issuance of up to 142,858 convertible warrants at ₹280 each, with the aggregate value stated at ₹4,00,00,240.
The board meeting also approved a proposal to increase the company's authorised share capital from ₹18.10 crore to ₹19.10 crore. The company additionally disclosed that the board approved material related-party transactions involving subsidiaries and promoters, and ratified the board's report for financial year 2025-26.
The issue is described as a promoter-led preferential allotment. The supplied disclosures identify four proposed allottees: Ajay Jaiswal, Vishal Jaiswal, Shikha Jaiswal and Niharika Jaiswal. The disclosed allocation is 35,715 warrants each to Ajay Jaiswal and Vishal Jaiswal, and 35,714 warrants each to Shikha Jaiswal and Niharika Jaiswal.
What conditions apply to the convertible warrants?
The warrants are subject to the applicable lock-in provisions under the SEBI Issue of Capital and Disclosure Requirements Regulations. The disclosures state that conversion must take place within a maximum period of 18 months from the date of warrant allotment.
BSE's conditions include further compliance with listing requirements before shares issued on conversion can be listed. The exchange also requires undertakings from allottees that they will not undertake intra-day trading in SMT Engineering's scrip. The allottees also cannot sell shares of the company until the date of allotment of the securities.
These conditions are relevant because a warrant issue does not immediately create the underlying equity shares. Equity shares arise when warrants are exercised and converted in accordance with the terms of the issue and applicable regulations.
Got a follow-up? Ask IRIS
What does the warrant approval mean for shareholders?
The approval creates a route for SMT Engineering to raise up to ₹4.00 crore in cash through the promoter preferential issue. Based on the disclosed issue terms, the capital would be linked to the exercise and conversion of the 142,858 warrants.
For existing shareholders, the principal consideration is potential dilution when the warrants convert into equity shares. The company disclosure cited an estimated dilution of about 0.79%. This estimate reflects the limited number of proposed shares relative to the company's existing equity base, though the final effect depends on allotment and conversion being completed.
The supplied market data placed SMT Engineering's market price at ₹274.40 against the ₹280 warrant issue price, making the issue price ₹5.60, or about 2.04%, above that quoted market price. The same disclosure characterised the ₹4 crore issue as about 3.3% of a stated ₹120 crore net worth and about 0.8% of a stated ₹487.9 crore market capitalisation.
Why does this approval matter in the company's capital plan?
SMT Engineering, formerly Adarsh Mercantile Limited, is described as an India-based company engaged in trading goods and shares. The proposed warrant issue comes alongside the board's plan to increase authorised share capital by ₹1 crore, which provides additional capacity within its capital structure.
The BSE approval is a regulatory milestone for the preferential issue, but it does not itself complete the fundraising or the listing of new shares. Investors will need to distinguish between the exchange's in-principle approval, the subsequent warrant allotment, and any eventual conversion into equity shares.
Conclusion
BSE's November 6 approval enables SMT Engineering to advance a promoter preferential issue of 142,858 convertible warrants at ₹280 each, with a maximum aggregate value of ₹4.00 crore. The proposed issue is modest relative to the disclosed market capitalisation and is structured to create equity shares only upon warrant conversion.
The next items to watch are the company's allotment actions, compliance with BSE's conditions and the exercise of warrants within the disclosed 18-month conversion period. Any conversion would add up to 142,858 equity shares of face value ₹10 each to the company's share capital.


