Aeron targets 60-65% utilisation after Mehsana expansion
Key highlights
- Aeron expanded installed capacity by 24.2% to 23,415 MT in FY26 from 18,845 MT in FY25.
- FY26 production was 11,360 MT and utilisation was 48.5%, versus 12,815 MT and 68.0% in FY25.
- Aeron targets more than 60-65% utilisation by FY27 through automation, process upgrades and scale efficiencies.
- Carbon-fiber products are expected to be commissioned by the end of FY27, alongside Rs 25 crore of IPO-proceeds deployment.
powered by IRIS

Aeron Composite targets more than 60-65% capacity utilisation by fiscal year 2027 (FY27) after commissioning its fully owned 51,671-square-metre Mehsana facility, which took installed capacity to 23,415 metric tonnes (MT) in FY26; actual production was 11,360 MT and utilisation was 48.5% that year.
Know Aeron Composites inside out
Results, valuation, peers and who's buying, in one view.
Why is Aeron increasing manufacturing capacity?
Aeron increased manufacturing capacity through its commissioned Mehsana, Gujarat facility, which has 51,671 square metres of manufacturing space and raised installed capacity from 18,845 MT in FY25 to 23,415 MT in FY26. The company describes the facility as fully integrated and fully owned, with the stated purpose of supporting future growth and new product lines.
The FY26 addition was 4,570 MT, or 24.2%, from FY25 capacity, after installed capacity remained unchanged at 18,845 MT in FY24 and FY25. Installed capacity had risen from 14,550 MT in FY22 to 16,503 MT in FY23 and 18,845 MT in FY24, making the FY26 increase the largest addition in Aeron’s five-year series.
Aeron says the larger platform lays a foundation for scalable growth, improved efficiency and stronger margins, which are management objectives rather than reported FY26 outcomes. Its stated mechanisms for lifting utilisation by FY27 are automation, process upgrades and scale efficiencies across pultrusion, gratings, rods and rebar lines.
Why did Aeron’s utilisation fall to 48.5% in FY26?
Aeron’s utilisation fell to 48.5% in FY26 as actual production declined while installed capacity increased. Production was 11,360 MT, down 1,455 MT, or 11.4%, from 12,815 MT in FY25, while capacity rose by 4,570 MT to 23,415 MT over the same period.
The FY26 result reversed the preceding three-year trend, when utilisation rose from 43.5% in FY22 to 54.0% in FY23, 61.3% in FY24 and 68.0% in FY25. In FY25, Aeron produced 12,815 MT against 18,845 MT of capacity; in FY26, it produced 11,360 MT against the expanded 23,415-MT base, reducing utilisation by 19.5 percentage points.
Aeron’s FY27 objective is more than 60-65% utilisation, rather than a disclosed production-volume forecast. Using the FY26 capacity base, 60% to 65% utilisation would equate to approximately 14,049 MT to 15,220 MT of production, an analytical calculation that exceeds both FY26 production of 11,360 MT and FY25 production of 12,815 MT.
What products will Aeron add at the Mehsana facility?
Aeron plans to use the new manufacturing unit for new product lines, including carbon-fiber products expected to be commissioned by the end of FY27. The listed uses for these products are windmill parts, automotive and railway applications, custom parts and transmission lines.
Aeron is also pursuing carbon fiber reinforced polymer (CFRP) and engineered composites for wind energy, railways and renewable-energy applications. The company says CFRP products can carry premium margins over glass fiber reinforced polymer (GFRP), but it does not disclose a price, margin percentage, sales volume or revenue contribution for CFRP.
FRP rebar is the earlier-stage new line, with manufacturing and initial sales commencing in H1FY26. Aeron lists roads, bridges, coastal structures and water-treatment plants as applications, and states that FRP rebar is four times lighter and twice as strong as steel rebar, with a listed price of Rs 140-145 per kilogram.
Got a follow-up? Ask IRIS
How is Aeron funding its capacity and product expansion?
Aeron plans to use Rs 25 crore of initial public offering (IPO) proceeds for the factory office building, CFRP building and machines, and rod-manufacturing machines. The presentation lists the same Rs 25 crore projected capital-expenditure figure alongside both the FRP rebar and carbon-fiber updates, without separating the allocation by product line.
Alongside the Mehsana investment, Aeron says it expanded rebar capacity and rebar bend-line capacity from four to eight by H1FY27. The company says this supports its certified-supplier position in a segment it identifies as having 10-14% global industry growth, although it does not disclose separate rebar capacity in MT or rebar revenue.
Aeron’s efficiency programme includes a 1,200-kilowatt solar plant, which it says it will leverage while promoting GFRP and CFRP as low-carbon, corrosion-free alternatives. Its research and development priorities include advanced resin systems, automation and material testing, but the presentation gives no capital cost, generation figure or savings estimate for the solar plant.
What must change for Aeron to meet its FY27 utilisation target?
Aeron must increase output from FY26’s 11,360 MT while operating its 23,415-MT installed base to meet the stated FY27 target of more than 60-65% utilisation. At 60% utilisation, output would be approximately 2,689 MT above FY26 production; at 65%, the difference would be approximately 3,860 MT, based on FY26 capacity.
The company’s disclosed route combines automation, process upgrades and scale efficiencies in pultrusion, gratings, rods and rebar with new products at Mehsana. Timing differs by line: FRP rebar manufacturing and initial sales began in H1FY26, while carbon-fiber products are expected to be commissioned by the end of FY27.
Aeron also identifies export expansion as a strategic priority while the facility ramps. Export revenue was 42% of total revenue in H1FY27, and the company says it sells in more than 39 countries; domestic sales were Rs 75.2 crore and export sales were Rs 54.6 crore in H1FY27, but the presentation does not state how much Mehsana or the new lines will supply to either channel.
Conclusion
Aeron’s FY26 expansion changed its production base: installed capacity increased 24.2% to 23,415 MT while production declined 11.4% to 11,360 MT, taking utilisation to 48.5% from 68.0% in FY25. The company’s FY27 objective therefore requires materially higher output from the enlarged capacity base, alongside the rollout of rebar and carbon-fiber products.
The next disclosed milestones are utilisation of more than 60-65% by FY27 and commissioning of carbon-fiber products by the end of FY27. Investors can watch whether automation, process upgrades, rebar and bend-line expansion from four to eight, and deployment of Rs 25 crore of IPO proceeds translate into higher reported production from Mehsana.


