Hindustan Zinc approves Rs 80,000 crore capacity buildout
Key highlights
- Hindustan Zinc plans to raise refined metal capacity from 1.1 MTPA to 2.0 MTPA in three to five years.
- Total ore-production capacity is planned to increase by 15.7 MTPA, from 19.3 MTPA to 35.0 MTPA.
- The 265 KTPA integrated Debari zinc smelter is expected to be commissioned by the second quarter of FY29.
- Silver-refining capacity is planned to rise from 800 TPA to 1,500 TPA through a new 700 TPA refinery.
powered by IRIS

Hindustan Zinc has approved an approximately Rs 80,000 crore mine, milling, smelting and silver-refining expansion intended to lift refined metal capacity from 1.1 million tonnes per annum (MTPA) to 2.0 MTPA in three to five years, alongside ore-production capacity of 35.0 MTPA from 19.3 MTPA.
Know Vedanta inside out
Results, valuation, peers and who's buying, in one view.
What has Hindustan Zinc’s board approved?
Hindustan Zinc’s board has approved projects with overall investment of approximately Rs 80,000 crore over three to five years. The stated investment includes an earlier approved phase one, new zinc and lead smelters, a 700-tonnes-per-annum (TPA) silver refinery, and the mine and milling expansions required to supply those processing facilities. The company also identifies a separate Rs 3,823 crore investment in a Rampura Agucha tailings reprocessing plant, whose output is intended as smelter feed.
The principal outcome is a move from 1.1 MTPA of refined metal capacity to 2.0 MTPA. Hindustan Zinc breaks the existing total into 0.9 MTPA of zinc and 0.2 MTPA of lead, while the planned 2.0 MTPA total consists of 1.6 MTPA of zinc and 0.4 MTPA of lead. That implies an increase of roughly 82% in the stated refined-metal total, rather than a simple addition of only one new facility.
Which mines and mills will Hindustan Zinc expand?
Hindustan Zinc plans to add 15.7 MTPA of mine and milling capacity, taking total ore-production capacity from 19.3 MTPA to 35.0 MTPA. The largest numerical expansion is 5.4 MTPA at Rajpura Dariba, where capacity is planned to rise from 1.1 MTPA to 6.5 MTPA. Zawar follows with a 4.3 MTPA addition, taking its capacity from 5.2 MTPA to 9.5 MTPA.
The plan also introduces 3.5 MTPA at Bamnia Kalan, which has no existing capacity listed in the expansion table. Rampura Agucha and Kayad together are planned to rise by 1.5 MTPA to 8.0 MTPA, while Sindesar Khurd is planned to increase by 1.0 MTPA to 7.5 MTPA. Hindustan Zinc says these ore-capacity figures are estimates based on a conceptual plan and may change after further detailing.
The planned ore-capacity increase of 81% is designed to support substantially higher downstream output. Rampura Agucha alone had 45.1 million tonnes of reserves as of March 31, 2026, with FY26 ore production of 5.08 MTPA, while Sindesar Khurd had 35.2 million tonnes of reserves and FY26 ore production of 5.43 MTPA. The expansion plan therefore combines additions at operating assets with the Bamnia Kalan development.
Got a follow-up? Ask IRIS
How will Hindustan Zinc increase zinc, lead and silver capacity?
Hindustan Zinc plans 765 thousand tonnes per annum (KTPA) of additional zinc smelting capacity and 200 KTPA of additional lead smelting capacity. Zinc smelting capacity is listed to rise from 934 KTPA to 1,611 KTPA, while lead capacity is planned to rise from 210 KTPA to 410 KTPA. Total smelting capacity is shown increasing from 1,144 KTPA to 2,021 KTPA.
The gap between the 965 KTPA of gross new zinc and lead capacity and the 877 KTPA net increase in total smelting capacity reflects discontinuation of an existing 88 KTPA Debari cell house. The detailed plan includes a 265 KTPA integrated zinc smelter at Debari, plus a further 500 KTPA zinc smelter and 200 KTPA lead smelter. Hindustan Zinc identifies the Rampura Agucha tailings reprocessing plant as a source of input for the smelters.
Silver-refining capacity is planned to increase from 800 TPA to 1,500 TPA through a new 700 TPA refinery. The existing 800 TPA refining capacity is at Pantnagar, where the company states it processes and refines zinc and refines lead and silver using 100% renewable-energy grid power. The proposed refinery would increase silver capacity by 87.5% from the existing base.
When could Hindustan Zinc’s capacity additions be commissioned?
Hindustan Zinc expects the 265 KTPA integrated Debari zinc smelter to be commissioned by the second quarter of FY29. The company describes this addition as moving toward 1.4 MTPA of refined metal capacity by FY29, compared with the current 1.1 MTPA. This interim step broadly corresponds to the 265 KTPA Debari addition before the larger 700 KTPA zinc-and-lead smelter package.
The additional 500 KTPA zinc smelter and 200 KTPA lead smelter are expected to be commissioned in three to five years, the same period attached to the overall approximately Rs 80,000 crore programme. Hindustan Zinc has not given a project-by-project commissioning date for the mine expansions, Bamnia Kalan, the 700 TPA silver refinery or the Rs 3,823 crore tailings reprocessing plant in the supplied presentation.
Management frames the expansion against Indian steel capacity rising from 205 million tonnes in FY2025 to 300 million tonnes by FY2030, and its presentation states Indian zinc demand could double over five to 10 years. It also cites India’s government infrastructure capital expenditure of Rs 11.21 lakh crore in FY2026 and 54.6 gigawatts of renewable capacity added in FY2026. These are market-context assertions in the presentation, not production or sales forecasts for Hindustan Zinc.
Conclusion
Hindustan Zinc’s approved programme links upstream ore availability with expanded processing: ore capacity is planned to rise by 15.7 MTPA to 35.0 MTPA, total smelting capacity by 877 KTPA to 2,021 KTPA, and silver refining by 700 TPA to 1,500 TPA. The stated refined-metal objective is 2.0 MTPA, compared with 1.1 MTPA currently, using additions in zinc, lead, mining, milling and tailings reprocessing.
The next disclosed milestone is the expected second-quarter FY29 commissioning of the 265 KTPA Debari integrated zinc smelter. Readers should also watch for further engineering detail because Hindustan Zinc says final mine and milling capacities may change from the current conceptual-plan estimates, and because the remaining 700 KTPA zinc-and-lead smelter package is scheduled only within a three-to-five-year range.


