Metalic Technoforge plans 8,800 MT forging capacity at Unit IV
Key highlights
- Metalic Technoforge reported 92.7% forging utilisation in H1 FY27, with 3,153 MT produced against 3,400 MT of six-month capacity.
- Metalic Technoforge plans to raise installed forging capacity from 6,800 MT to 8,800 MT through Unit IV.
- Unit IV civil work is complete, while fabrication is in progress at a site with 788.02 square metres of total area.
- Metalic Technoforge lists 82 product variants across five engineering segments, including 32 gears and transmission variants.
powered by IRIS

Metalic Technoforge Limited reported 92.7% forging utilisation in H1 FY27, while its Unit IV plan will raise installed forging capacity from 6,800 metric tonnes (MT) to 8,800 MT. The company said civil work at Unit IV was complete and fabrication was in progress, with servo screw press forging, computer numerical control (CNC) gear grinding and sealed-quench heat treatment planned.
Know Metalic Technoforge inside out
Results, valuation, peers and who's buying, in one view.
How full are Metalic Technoforge’s existing forging plants?
Metalic Technoforge’s Units I–III operated at 92.7% utilisation in the first half of FY27 (H1 FY27), covering April to September 2026. The three units had installed capacity of 3,400 MT for those six months and actual production of 3,153 MT. The presentation places the planned Unit IV addition against a production base using more than nine-tenths of reported H1 capacity.
Utilisation recovered from 77.7% in FY24 to 89.7% in FY25, 90.2% in FY26 and 92.7% in H1 FY27. FY23 utilisation was higher at 93.2%, based on 5,128 MT of actual production against 5,500 MT of installed capacity. Actual output rose from 5,131 MT in FY24 to 6,135 MT in FY26, while installed capacity increased from 6,600 MT to 6,800 MT over the same period.
What capacity will Metalic Technoforge add through Unit IV?
Metalic Technoforge says Unit IV will raise forging capacity by 2,000 MT, from 6,800 MT to 8,800 MT. The presentation does not state a commissioning date, expected production volume, capital expenditure or utilisation target for Unit IV. The 8,800 MT figure is therefore planned installed capacity rather than reported output.
The new facility had total area of 788.02 square metres and built-up area of 534.00 square metres at the time of the H1 FY27 presentation. Civil work was complete, while fabrication remained in progress. Unit I has 1,940.99 square metres of total area, Unit II has 1,845.93 square metres and Unit III has 1,393.57 square metres, making Unit IV the smallest of the four sites by reported total area.
What work will Unit IV bring into Metalic Technoforge’s operations?
Metalic Technoforge identifies three operational additions for Unit IV: servo screw press forging for near-net-shape components, CNC gear grinding for high-precision gears, and sealed-quench heat treatment brought in-house. The disclosed programme combines added forging capacity with equipment for the forging, gear-finishing and heat-treatment stages of production.
The planned processes sit within a 12-step manufacturing sequence that starts with product drawings and raw-material procurement and ends with final inspection, packaging and dispatch. Between those stages are cutting, die development and tooling, forging, heat treatment, shot blasting, machining and teeth cutting. Unit I already houses forging, heat treatment and shot blasting, while Unit II is the machining, finished-goods storage, packaging and dispatch location; Unit III holds raw material, cutting, die manufacturing and tooling.
Got a follow-up? Ask IRIS
Which products could use Metalic Technoforge’s added precision capabilities?
Metalic Technoforge makes 82 product variants across five engineering segments: 32 in gears and transmission, 16 in construction machinery, 15 in hydraulic applications, 10 in general engineering and nine in transmission shafts. The largest segment includes tractor gears, shafts and pinions, providing context for the planned CNC gear-grinding capability. The company does not allocate Unit IV capacity or equipment to a particular segment or customer in the presentation.
Its examples span farm equipment, pump and gearbox parts, and off-highway vehicle components. Farm-equipment products include drive shafts, actuator shafts and final pinion shafts, while the off-highway list includes conical satellite gears, clutch bells, synchro rings and sun gears. Existing hot-forging capability covers closed-die parts from 250 grams to 16 kilograms, and Metalic Technoforge says its gear operations can use CNC hobbing, shaping, shaving and in-house gear testing.
How does Unit IV fit Metalic Technoforge’s broader manufacturing plan?
Metalic Technoforge separately lists a proposed expansion of manufacturing operations at Pune, the onboarding of three new original equipment manufacturer (OEM) customers with significant volume potential, and an application for AS9100 aerospace certification. The presentation does not link the 8,800 MT capacity target to volumes from the three new OEMs or to aerospace orders.
Metalic Technoforge describes its manufacturing model as bringing forging, machining, finishing and assembly under one roof. Its quality systems include inspection of every part on ZEISS coordinate measuring machine and contour systems, and it reports IATF 16949 certification. The sealed-quench heat-treatment addition should be distinguished from the company’s existing statement that it already performs in-house heat treatment to customer specifications, because the Unit IV disclosure specifically identifies the sealed-quench process.
Conclusion
Metalic Technoforge’s reported 92.7% H1 FY27 utilisation at Units I–III provides the operating context for the planned move from 6,800 MT to 8,800 MT of forging capacity. The project is not solely a volume addition: the company has specified servo screw press forging, CNC gear grinding and sealed-quench heat treatment, alongside a product base of 82 variants across five segments.
The next disclosed matter to watch is completion of Unit IV fabrication, which remained in progress after civil work was completed. Metalic Technoforge has also disclosed a proposed Pune manufacturing expansion, three newly onboarded OEM customers with significant volume potential, and an AS9100 aerospace-certification application, but has not provided Unit IV commissioning timing, spending, output or utilisation targets.


