PTC Secures Airbus Titanium Castings and Safran LEAP Order
Key highlights
- Aerolloy’s Airbus agreement covers titanium castings for the A320neo, A330neo and A350 programmes.
- Aerolloy received a Safran Aircraft Engines development order for LEAP engine titanium cast components.
- Aerolloy reported Q2FY27 total income of Rs 90.90 crore, up 213.3% year on year.
- PTC completed a Rs 1,800 crore QIP through 8,54,700 shares at Rs 21,060 each.
powered by IRIS

PTC Industries Limited disclosed on 16 November 2026 that Aerolloy secured an Airbus titanium-castings agreement and a Safran LEAP development order, while Aerolloy’s Q2FY27 total income rose 213.3% year on year to Rs 90.90 crore. Both aerospace programmes remain subject to development and qualification before potential serial production.
Know PTC Industries inside out
Results, valuation, peers and who's buying, in one view.
What did PTC disclose about the Airbus and Safran work?
PTC disclosed an Airbus agreement for titanium castings and a Safran Aircraft Engines development order for the LEAP engine programme in its 16 November 2026 release covering the quarter and half year ended 30 September 2026. Aerolloy, PTC’s wholly owned subsidiary, is the supplier named in both commercial aerospace developments.
PTC said the Airbus and Safran work involves titanium components that are fully machined and ready to fit. The manufacturing mechanism combines titanium materials, precision casting, machining and inspection in an integrated route, rather than supplying castings without subsequent machining and finishing.
The disclosure did not specify contract values, order quantities, delivery dates or annual production rates for either programme. It instead sets out a development and qualification path, with PTC stating that the two projects provide a foundation for potential long-term serial production after successful development and qualification.
Which Airbus aircraft programmes does Aerolloy’s agreement cover?
Aerolloy’s Airbus agreement covers titanium castings for the A320neo, A330neo and A350 aircraft programmes. The agreement spans development, qualification, industrialisation and future supply, according to PTC’s 16 November 2026 disclosure.
The Airbus arrangement therefore extends beyond an initial engineering activity because it includes a stated future-supply element after industrialisation. However, PTC did not disclose the number of parts, the value of future supply or a schedule for qualification across the three named aircraft programmes.
The specified product is fully machined, ready-to-fit titanium castings, supported by Aerolloy’s materials, casting, machining and inspection processes. PTC said this integrated manufacturing route supports Aerolloy’s participation in global commercial aerospace supply chains, although it did not quantify revenue from the Airbus work in Q2FY27.
What does the Safran LEAP development order mean for PTC?
Aerolloy received a Safran Aircraft Engines development order for critical titanium cast components for the LEAP engine programme. The components are to be fully machined and ready to fit, using the same integrated manufacturing model described for the Airbus castings.
An accompanying memorandum of understanding, or MoU, establishes the commercial framework for the LEAP components. PTC said potential long-term serial production depends on successful development and qualification, so the order does not confirm serial-production volumes or a revenue value as of 16 November 2026.
The two aerospace developments apply to different end uses: Airbus concerns castings for the A320neo, A330neo and A350 airframe programmes, while Safran concerns critical cast components for an engine programme. Both developments involve titanium components, but the source identifies separate programme and qualification routes.
Got a follow-up? Ask IRIS
How did Aerolloy and PTC perform in the reported periods?
Aerolloy reported Q2FY27 total income of Rs 90.90 crore, up 213.3% from Rs 29.01 crore in Q2FY26. Its earnings before interest, tax, depreciation and amortisation, or EBITDA, were Rs 42.83 crore, with an EBITDA margin of 47.1% in the quarter ended 30 September 2026.
Aerolloy’s profit after tax, or PAT, was Rs 30.44 crore in Q2FY27, up 213.6% year on year. PTC did not attribute this quarter’s income, EBITDA or PAT to the Airbus agreement or Safran development order, both of which remain in development and qualification activity.
PTC’s consolidated first half of financial year 2027, or H1FY27, performance also increased from H1FY26 across income, EBITDA and PAT. The largest percentage increase was PAT, which rose 168.2% to Rs 62.47 crore, compared with 116.9% EBITDA growth and 77.3% total-income growth.
How is PTC funding its aerospace manufacturing plans?
PTC completed a Rs 1,800 crore qualified institutions placement, or QIP, through the issue of 8,54,700 equity shares at Rs 21,060 each. The company said the QIP was oversubscribed by more than five times the issue size and that proceeds add flexibility for organic expansion, strategic investments and inorganic growth opportunities.
PTC is making a multi-million-dollar investment in an integrated titanium and superalloy manufacturing ecosystem at its Lucknow facility in the Uttar Pradesh Defence Industrial Corridor. The planned platform includes a mill for aerospace-grade ingots, billets, bars, plates and sheets, alongside a precision-casting facility, matching the materials and component processes cited in the Airbus and Safran disclosures.
PTC also signed an MoU with the Uttar Pradesh government’s MSME and Export Promotion Department for the STrIDE Academy. The academy at the Strategic Materials Technology Complex will cover precision machining, robotics, automation, specialised welding, advanced metallurgy, industrial maintenance and quality assurance, which are skills relevant to the company’s casting and machining activities.
Conclusion
The Airbus agreement and Safran LEAP development order put Aerolloy into disclosed development, qualification and industrialisation work across commercial aircraft and engine applications. The common manufacturing route is fully machined, ready-to-fit titanium components, while Aerolloy’s Q2FY27 income of Rs 90.90 crore and PTC’s H1FY27 PAT of Rs 62.47 crore show reported growth in the wider platform.
The next development to watch is progress through qualification and development, because PTC has said potential long-term serial production follows only if those stages succeed. PTC has also disclosed a Rs 1,800 crore QIP and plans for its Lucknow titanium and superalloy platform, making deployment of those proceeds and execution of the planned manufacturing capabilities relevant next steps.


