Sandhar Technologies expects project losses to ease next year
Key highlights
- Sandhar Technologies expects Rs 540 crore of new-project investment to support Rs 1,620 crore to Rs 2,160 crore of revenue after stabilisation.
- New projects recorded a nearly Rs 25 crore PBT loss, including a Rs 14.38 crore EBT loss in the acquired casting business in first-half FY27.
- Sandhar Technologies reported first-half FY27 revenue of Rs 2,999.57 crore, up 27% year on year.
- Sandhar Technologies had spent Rs 191 crore on capital expenditure and expected a further Rs 150 crore outflow over the following five months.
powered by IRIS

Sandhar Technologies Limited expects a large part of the nearly Rs 25 crore profit-before-tax loss from its new projects to be eliminated in the next financial year, led by consolidation of its acquired casting operation. Management said Rs 540 crore of investment across these projects could ultimately support revenue worth three to four times that amount.
Know Sandhar Technologies inside out
Results, valuation, peers and who's buying, in one view.
How much revenue does Sandhar Technologies expect from new projects?
Sandhar Technologies expects its Rs 540 crore investment in new projects to generate revenue worth three to four times the investment once the operations stabilise. That implies potential revenue of Rs 1,620 crore to Rs 2,160 crore, although management did not specify when the portfolio would reach this range.
The projects include the acquired Sundaram-Clayton casting business, the cabins and fabrication division at Sanaswadi, and the sheet-metal plant at Oragadam in Chennai. Management also identified electric-vehicle, or EV, operations and an overseas project as businesses whose fuller effect should start reflecting in the next financial year.
This prospective revenue base compares with Sandhar Technologies' first-half FY27 revenue of Rs 2,999.57 crore, up 27% year on year. Second-quarter FY27 revenue was Rs 1,618 crore, while management said industry growth was 21% and Sandhar Technologies' overall growth was 27% in the first half.
Why are Sandhar Technologies' new projects making losses?
Sandhar Technologies' new projects are making losses because several units remain in commissioning, relocation or early ramp-up, with fixed costs running before production reaches intended levels. Management said the group of new projects had negative earnings before interest, tax, depreciation and amortisation, or EBITDA, and a PBT loss of nearly Rs 25 crore.
The largest part of that loss came from the acquired Sundaram-Clayton casting business. It reported a first-half FY27 loss before tax, or EBT, of Rs 14.38 crore, while its EBITDA loss was Rs 1 crore. Management attributed the gap mainly to unabsorbed finance costs and depreciation.
The casting business is operating from both its old leased site and the new premises during the move. Rent and fixed expenses at the new facility began in the second quarter of FY27, while production continued at the old location, creating the cost of running two large facilities until consolidation is completed.
When does Sandhar Technologies expect losses to decline?
Sandhar Technologies expects a large part of the new-project loss to be removed next year, principally after the acquired casting business is consolidated into one facility in the fourth quarter of FY27. Management said it was very confident that the acquired business would not report a loss in the next financial year.
The move depends partly on power availability at the Chennai facility, which requires 4 megawatts, or MW. Management said 1 MW had been released about one and a half months before the call and a second MW had been used for the preceding 15 days, leaving 2 MW pending.
High-pressure die casting is already active at the new Chennai site. However, low-pressure die casting and some machining lines still need to move from the old facility. Management said it had been promised the remaining power by the end of December and expected the operational impact of full consolidation in the final quarter of FY27.
Management gave different timelines for other units. It expects the Sanaswadi cabins and fabrication division to turn around in the third quarter of FY27, and said the Oragadam sheet-metal business should become profitable. EV operations may take longer because management described them as a newer business.
Got a follow-up? Ask IRIS
What margins does Sandhar Technologies target after stabilisation?
Sandhar Technologies expects the new projects to move toward its usual operational margin of about 10% after stabilisation. Management presented that level as the normal margin profile of its established operations, rather than a near-term forecast for every project under commissioning.
The company's Indian aluminium operations reported revenue of Rs 765 crore and overseas aluminium operations reported Rs 258 crore, totalling more than Rs 1,000 crore in the first half of FY27. Fabrication revenue was Rs 861 crore, and management said these operating verticals were above 9% margin, excluding the commissioning-stage acquired casting project.
At the consolidated level, Sandhar Technologies reported EBITDA of Rs 261 crore in the first half of FY27, up 24% year on year, with an EBITDA margin of 8.64%. Management said the comparable prior-year margin was 8.84%, a difference of 20 basis points after accounting for non-recurring income. One basis point equals one-hundredth of a percentage point.
Management also cited a Rs 13 crore minimum-wage cost impact in the first half and said it expected some customer settlement in the third and fourth quarters of FY27. It maintained an operational-margin expectation of about 9% to 9.35% for the full year and said second-half margins should be 30 to 40 basis points above the first half.
What supports Sandhar Technologies' project ramp-up?
Sandhar Technologies said new customer business is supporting growth in sheet metal and casting, beyond the effect of higher commodity prices. Management named TVS, Hero, Royal Enfield and Honda among customers that had awarded business which was being stabilised and expanded.
The two-wheeler business grew 33% in the first half of FY27, against industry growth of 20%. Overall company revenue rose 27%, compared with 21% industry growth, although management did not quantify the revenue contribution from each customer or product award.
EV remains small relative to group revenue but is another ramp-up area. Sandhar Technologies recorded Rs 18 crore of EV revenue in the first half of FY27, selling about 11,116 motor-controller units and 19,209 battery chargers. Management said it had budgeted to double EV revenue from the prior year and believed it was on track.
Capital spending continues alongside the commissioning programme. Sandhar Technologies had spent Rs 191 crore of capital expenditure, including carry-forward spending from the prior year, and expected another Rs 150 crore cash outflow over the following five months. For annual capital expenditure excluding new projects, management indicated 5% to 7% of revenue.
Conclusion
Sandhar Technologies is pursuing a sizeable revenue opportunity from Rs 540 crore of new-project investment, but the current financial effect is a nearly Rs 25 crore PBT loss from early-stage operations, duplicated facilities and unabsorbed fixed costs. The acquired casting business accounts for the largest disclosed component, with a Rs 14.38 crore first-half FY27 EBT loss.
The next item to watch is the release of the remaining 2 MW for the Chennai site and the relocation of low-pressure casting and machining lines in the fourth quarter of FY27. Management also expects partial customer recovery of the Rs 13 crore wage-cost impact and says a large part of new-project losses should not recur in the next financial year.


