Shri Kanha Stainless Limited mill plan targets 2.5-fold capacity
Key highlights
- SKSL plans a 1,150 mm 4-Hi AGC mill that management says will take current 14,000 MTPA capacity to 2.5 times that level.
- Capital work-in-progress was Rs 3.6289 crore as at 30 September 2026.
- H1FY27 profit after tax rose 32.0% year on year to Rs 5.6193 crore.
- H1FY27 EBITDA margin increased 83 basis points to 9.22% despite a 6.8% revenue decline.
powered by IRIS

Shri Kanha Stainless Limited is adding a 1,150 mm 4-Hi automatic gauge control rolling mill intended to take its 14,000 metric tonnes per annum capacity to 2.5 times that level, with management targeting 90% utilisation. The project targets shaving-blade strip, precision electronics, original equipment manufacturer programmes and exports.
Know Shri Kanha Stainless inside out
Results, valuation, peers and who's buying, in one view.
What expansion is SKSL planning?
SKSL is adding a 1,150 mm 4-Hi automatic gauge control, or AGC, rolling mill that management says will increase capacity to 2.5 times the existing 14,000 metric tonnes per annum, or MTPA. The company has not disclosed a commissioning date, project cost, funding split or the resulting nominal MTPA capacity, but it has set a 90% utilisation target for the expanded facility.
The project was under way as at 30 September 2026, when SKSL reported capital work-in-progress of Rs 3.6289 crore. The company said this balance reflected progress on the capacity expansion and also reported no deviation or variation in the use of initial public offering proceeds, without specifying the amount allocated to the new mill.
The planned 1,150 mm equipment will join a Reengus, Sikar plant that currently has 14,000 MTPA installed capacity and a 29-inch 20-Hi AGC rolling mill. Management presents the project as a means of expanding its product and customer programme, particularly in applications requiring controlled tolerance and finish, rather than solely increasing standard stainless-steel output.
Which products will SKSL target with the new mill?
SKSL identifies shaving-blade strip as the primary target for the 1,150 mm mill, alongside export business and original equipment manufacturer, or OEM, programmes. Management also cited precision electronics as an opportunity for the project and said domestic competition is limited in shaving-blade strip at the tolerance required for that segment.
SKSL currently makes cold-rolled coils and strips in thicknesses from 0.08 mm to 2.00 mm and widths from 3.5 mm to 750 mm. These products are used in surgical instruments, heat exchangers and high-speed production lines, while its sheets range from 30 mm to 1,250 mm wide and its circles are produced on three cutting lines for utensil and component makers.
The existing technical capability is rolling strip down to 0.08 mm on a 20-Hi AGC mill, which controls thickness in real time across the strip width. SKSL says conventional domestic units generally stop at about 0.15 mm because of machinery limits and process instability; it links its thinner-gauge capability to razor blades, precision electronics and surgical instruments.
All SKSL products use American Iron and Steel Institute, or AISI, 200, 300 and 400 series stainless-steel grades. The company says it prices its output on tolerance and finish rather than tonnage, placing coils, strips, circles and sheets in the value-added end of the stainless-steel flat-products market.
What manufacturing base supports SKSL's expansion?
SKSL operates one integrated facility at Reengus, Sikar, Rajasthan, spanning 6,076 square metres and employing about 81 people, including 42 in production. The site has 14,000 MTPA capacity, a 29-inch 20-Hi AGC mill, two bright-annealing lines, one conventional annealing line, three slitting lines, three circle-cutting lines, one sheet line and one polish line.
The manufacturing process has five stages: inspection of mother coils, slitting, two-stage cold rolling to as thin as 0.08 mm, bright annealing and final cutting, polishing, deburring and a zero-defect check. The facility is ISO 9001:2015 certified, complies with Bureau of Indian Standards, or BIS, requirements, and includes an in-house tensile-testing laboratory.
SKSL sells through three channels: dealer-cum-customer hubs, mid-node distributors and direct technical sales to OEM and end-user accounts. Its products serve 21 end uses, including textile machinery, automotive components, chemical applications, flexible and capillary tubes, electrical equipment, precision electronics, railway coaches, pharmaceuticals, oil and gas, power and dairies.
Got a follow-up? Ask IRIS
How did SKSL perform during H1FY27?
SKSL reported revenue from operations of Rs 102.7097 crore in H1FY27, down 6.8% from Rs 110.2253 crore in H1FY26 but up 7.6% over H2FY26. Despite the year-on-year revenue decline, earnings before interest, tax, depreciation and amortisation, or EBITDA, rose 2.4% to Rs 9.4679 crore; the company said EBITDA excludes other income.
SKSL's EBITDA margin increased by 83 basis points to 9.22% in H1FY27 from 8.39% a year earlier. Profit after tax rose 32.0% to Rs 5.6193 crore, while the profit-after-tax margin increased by 161 basis points to 5.47% from 3.86%; finance costs fell 7.6% to Rs 2.2818 crore.
Basic and diluted earnings per share were Rs 3.61 in H1FY27, compared with Rs 4.08 in H1FY26, and SKSL noted that half-year earnings per share are not annualised. Net worth stood at Rs 67.0059 crore on 30 September 2026, up from Rs 61.3866 crore on 31 March 2026.
Why do tolerance and market mix matter to SKSL's plan?
Tolerance and surface finish matter because SKSL is targeting shaving blades, surgical instruments and precision electronics, which it associates with thin gauges and controlled specifications. The company intends to pair the 1,150 mm mill with its existing ability to roll to 0.08 mm, compared with the approximately 0.15 mm level it says many conventional domestic units reach.
SKSL cited mandatory BIS certification as a factor limiting non-compliant imports and identified stainless steel's recyclability and longevity relative to plastic as demand considerations. It also cited urbanisation, infrastructure growth and demand for premium appliances and construction materials, while its 21 end uses provide exposure across industrial and consumer-oriented applications.
Management's stated 90% utilisation target is contingent on commissioning the mill and developing shaving-blade, export and OEM programmes. The filing cautions that forward-looking statements are subject to risks including earnings fluctuations, growth management, competition, economic conditions, government policy and interest and fiscal costs.
Conclusion
SKSL's plan combines a 2.5-fold capacity objective with a focus on precision cold-rolled products rather than volume alone. In H1FY27, revenue fell 6.8% year on year to Rs 102.7097 crore, while profit after tax increased 32.0% to Rs 5.6193 crore and EBITDA margin rose to 9.22%.
The next matters to watch are commissioning progress for the 1,150 mm 4-Hi AGC mill and movement towards management's 90% utilisation target. Capital work-in-progress was Rs 3.6289 crore at 30 September 2026, while shaving-blade, export and OEM programmes remain the disclosed routes for using the added capacity.


