TCPL separator venture will coat before extrusion for LFP, NMC
Key highlights
- TCPL incorporated wholly owned subsidiary TCPL Energy Materials Limited on 24 September 2026.
- TCPL said its separator films can serve LFP and NMC chemistry across cylindrical, prismatic and pouch cells.
- Management estimated separator demand at 8 million to 12 million square metres for each 1 GWh of cell capacity.
- TCPL said the current investment could support up to Rs 200 crore of revenue.
powered by IRIS

TCPL will coat separator films for LFP and NMC lithium-ion cells before backward integrating into polyethylene-resin extrusion, with management saying the current investment could support up to Rs 200 crore of revenue. The Q2 FY27 disclosure positions the venture as a phased, chemistry-agnostic expansion that management said would take a few years to affect overall results.
Know TCPL Packaging inside out
Results, valuation, peers and who's buying, in one view.
Which battery cells will TCPL’s separator business serve?
TCPL’s planned separator-film business is designed to be agnostic to battery chemistry and cell format. At the Q2 FY27 earnings call, Vidur Kanoria said the investment would support lithium-ion cells using LFP or NMC chemistry, as well as cylindrical, prismatic and pouch-cell formats. TCPL is therefore not building its initial offering around one battery technology.
Management linked that decision to Indian cell-manufacturing projects now being established. According to Vidur Kanoria, potential customers setting up giga factories in India are using either NMC or LFP chemistries, while separator specifications for those chemistries are “quite similar in nature.” TCPL therefore expects its separator-film capability to address both chemistry routes discussed by domestic cell manufacturers.
The separator-film requirement varies with cell specifications. Management estimated that 1 gigawatt-hour, or GWh, of cell capacity requires about 10 million square metres of separator film, within a range of 8 million to 12 million square metres per GWh. Separators account for about 6% to 10% of cell cost, rather than battery-pack cost, according to management.
This approach gives TCPL scope to serve several cell formats and chemistries. It does not remove the need for customer development: Akshay Kanoria said qualification may be shorter than for anodes and cathodes, but it is still long, and customers do not find it easy to switch after a separator has been developed for a particular cell chemistry.
How will TCPL make battery separator films initially?
TCPL will start with water-based coating machines and subsequently add extrusion, management said on the Q2 FY27 call. Vidur Kanoria described extrusion as a later, substantially larger investment and line through which TCPL would make the film itself from polyethylene resin.
The sequence makes coating TCPL’s first manufacturing capability rather than in-house film production from day one. Management said the later extrusion stage will require a much bigger line and investment. It also said working-capital requirements were too early to quantify, but would not be significant initially and could be lower after backward integration.
An analyst asked whether the planned method was the wet process used by Sembcorp, and Vidur Kanoria replied yes. The call did not disclose a commissioning date, installed capacity, capital expenditure, supplier, yield target or film thickness. The transcript therefore establishes the process direction and sequence, but not a timetable for first commercial output.
TCPL incorporated TCPL Energy Materials Limited, its wholly owned subsidiary for the lithium-ion battery separator-film business, on 24 September 2026. In prepared remarks, TCPL said the project was in its initial stages, focused on manufacturing infrastructure and basic capabilities for a long-term platform spanning electric mobility, grid-scale energy storage and other applications.
Got a follow-up? Ask IRIS
What revenue scale does TCPL expect from the venture?
TCPL has said the current investment could support up to Rs 200 crore of revenue, while full-scale revenue could reach Rs 1,000 crore to Rs 2,000 crore in a couple of years. Akshay Kanoria presented these figures as an ambition dependent on India’s domestic battery ecosystem, TCPL’s execution and global market conditions, rather than as financial guidance.
Management described the first phase as a “baby step,” while saying it has sufficient land and infrastructure to scale over the next five to six years and build a substantial revenue base. The difference between the up-to-Rs-200-crore opportunity on the current investment and the Rs 1,000 crore to Rs 2,000 crore full-scale range indicates that the larger revenue ambition depends on later expansion.
TCPL did not provide a target for the separator business’s share of group revenue, earnings before interest, tax, depreciation and amortisation, or EBITDA, margin, or full-capacity-utilisation date. When asked when separators would improve overall financial performance, Akshay Kanoria said the initiative would take a few years to translate into anything and gave no timeline.
The long development period contrasts with TCPL’s existing packaging performance in Q2 FY27. Consolidated total income rose 20.2% year on year to Rs 564.6 crore, while EBITDA increased 27.5% to Rs 100.1 crore and the EBITDA margin reached 17.7%. The battery initiative is consequently being developed alongside the packaging businesses that currently generate reported revenue and profit.
Why is TCPL using a phased investment approach?
TCPL is using a phased and calibrated approach because separator manufacturing, localisation and competition involve execution risks. Akshay Kanoria said TCPL was not making a gigantic investment that could “break the bank,” but was progressing step by step as battery customers and market conditions develop.
Management said customers are interested in localising separator supply as they scale in India, and Vidur Kanoria said separator prices had risen globally. It also cited government schemes being planned as a potential support for competitiveness. Management nevertheless acknowledged risks because imported separator films, including supply from China, remain part of the market context.
TCPL considers technology and customer qualification important barriers despite a qualification cycle that management said is shorter than for anodes and cathodes. Akshay Kanoria said separator process know-how is critical, few companies outside China have scaled successfully, and those companies incurred substantial technology-development costs. Vidur Kanoria added that the technology is not yet established or widely known in India.
TCPL also sees the absence of other Indian separator producers as an initial advantage, but management did not assume that position would last. Saket Kanoria said competition could emerge and “should come,” while adding that he did not expect competitors to move faster than TCPL. That is management’s assessment, not a market-share or pricing forecast.
Conclusion
TCPL’s battery-film venture is designed for breadth first and manufacturing depth later: it aims to serve LFP and NMC cells across three cell formats, begin with water-based coating, and add polyethylene-resin extrusion after building the business. The model limits the initial commitment while leaving scope to scale from management’s up-to-Rs-200-crore current-investment opportunity toward its larger stated ambition.
The next items to watch are TCPL’s progress in establishing manufacturing infrastructure at TCPL Energy Materials Limited, its movement from coating into extrusion, and development of Indian giga factories over the next five to six years. Management has not set a commissioning date, working-capital figure, margin target or date for a material group-level contribution, leaving those milestones unresolved.


