Lloyds Enterprises group creates 150,000-MTPA steel platform
Key highlights
- Lloyds Enterprises group acquired 87.45% of SISCOL for Rs 1,073.40 crore on 18 June 2026.
- SISCOL lifts combined structural-fabrication capacity to 150,000 MTPA from its stated 100,000-MTPA capacity.
- SISCOL reported H1 FY27 income of Rs 500 crore, EBITDA of Rs 51 crore and an order book of Rs 1,260 crore.
- LEWL’s engineering platform reported a Rs 10,355 crore order book at 30 September.
powered by IRIS

Lloyds Enterprises Limited’s group acquired 87.45% of Steel Infra Solutions Company Limited on 18 June 2026 for Rs 1,073.40 crore, creating a combined structural-fabrication capacity of 150,000 metric tonnes per annum (MTPA) and adding SISCOL’s Rs 1,260 crore order book to a Rs 10,355 crore engineering platform at 30 September.
Know Lloyds Enterprises inside out
Results, valuation, peers and who's buying, in one view.
What did Lloyds Enterprises group acquire in SISCOL?
Lloyds Enterprises group acquired 87.45% of SISCOL for Rs 1,073.40 crore, following board approval on 18 June 2026. SISCOL, incorporated in 2017, provides design, engineering, fabrication, supply and erection services for structural steel. The disclosed group stake is held through Lloyds Engineering Works Limited (LEWL), Lloyds Enterprises and Streamland Estate LLP.
SISCOL had executed 187 structural-steel projects across 22 states when the presentation was prepared. Named projects include Delhi Airport Terminal 1, Noida International Airport at Jewar, the Dwarka Convention Centre and International Tech Park, Bengaluru. The presentation also identifies L&T and Tata Projects as clients, connecting the acquisition to an existing project base as well as fabrication capacity.
The transaction places SISCOL within LEWL’s wider engineering platform, which operates at Ahmedabad, Nagpur, Murbad, Bhilai and SISCOL. The platform has about 3 lakh square metres of manufacturing capacity across those locations. That area measure is distinct from the 150,000-MTPA structural-fabrication capacity disclosed after the transaction.
How is the SISCOL acquisition structured?
LEWL acquired 51.70% of SISCOL for Rs 635.40 crore through a mix of cash and share swap. Lloyds Enterprises acquired 17.88%, while Streamland Estate LLP acquired a further 17.88%. The listed stakes total 87.46% because of rounding, while the presentation reports the group acquisition at 87.45%.
Lloyds Enterprises is identified as LEWL’s holding company with an approximately 33% stake. The presentation says LEWL’s growth and value creation flow to Lloyds Enterprises shareholders through that holding. Its H1 FY27 entity table also lists SISCOL as 51.7% owned, consistent with LEWL’s acquired stake.
The presentation gives the total transaction consideration and LEWL’s consideration, but does not state the split between cash and share swap within LEWL’s Rs 635.40 crore payment. It also does not disclose a separate consideration amount for the 17.88% stake acquired directly by Lloyds Enterprises or the matching Streamland Estate LLP stake.
How does SISCOL change Lloyds Enterprises’ fabrication capacity?
SISCOL raises Lloyds Enterprises group’s combined structural-fabrication capacity to 150,000 MTPA. LEWL’s fabrication engine lists SISCOL at 100,000 MTPA and 187 projects, while Bhilai is described as the group’s heavy-engineering operation. SISCOL therefore provides two-thirds of the combined stated structural-fabrication capacity.
The acquisition sits alongside three other LEWL engines: electrical, engineering, procurement and construction (EPC) and infrastructure, and defence. Techno Industries’ electrical business has a new Vatva plant with capacity for more than 200 elevators a month and Rs 26.7 crore of research and development expenditure. LICL’s EPC work covers mining-to-metal, steel and power, while the defence engine has naval, unmanned aerial vehicle and radar tie-ups and Rs 31 crore of research and development expenditure.
Management says SISCOL adds scale, marquee clients and execution depth and gives the group future value-unlocking optionality. However, the presentation does not disclose a post-acquisition integration timetable, synergy target, or structural-fabrication expansion target beyond 150,000 MTPA.
Got a follow-up? Ask IRIS
What did SISCOL contribute in H1 FY27?
SISCOL reported H1 FY27 total income of Rs 500 crore, earnings before interest, tax, depreciation and amortisation (EBITDA) of Rs 51 crore, and profit after tax (PAT) of Rs 20 crore. Its EBITDA margin was 10.22%, shown as 10.2% after rounding in LEWL’s entity-income table.
SISCOL was the third-largest named contributor to LEWL’s Rs 2,550 crore H1 FY27 pro forma income, behind the 24.2%-owned associate listed as LICL at Rs 1,402 crore and LEWL standalone at Rs 718 crore. SISCOL’s Rs 500 crore was higher than Metalfab’s Rs 198 crore, Techno Industries’ Rs 90 crore and LADS’ Rs 7 crore.
SISCOL’s 10.2% margin was below the disclosed margins of LEWL standalone at 16.3%, Metalfab at 15.4%, LICL at 14.3% and LADS at 16.2%. At the platform level, H1 FY27 pro forma EBITDA was Rs 359 crore, up 50%, and pro forma PAT was Rs 212 crore, up 33%. The presentation does not provide SISCOL’s prior-period results, so its own growth rate cannot be calculated from the disclosed figures.
How large is Lloyds Enterprises’ engineering order book?
Lloyds Enterprises’ engineering platform reported a Rs 10,355 crore order book at 30 September, while SISCOL separately reported Rs 1,260 crore. The platform also reported H1 FY27 pro forma income of Rs 2,550 crore, up 74%. The presentation does not reconcile SISCOL’s separate order book to the platform total or its individual categories.
EPC and infrastructure was the largest backlog category at Rs 5,764 crore, or 56% of the total. Other engineering accounted for Rs 3,149 crore, or 30%, while fabrication accounted for Rs 1,443 crore, or 14%. Fabrication was therefore smaller than both other engineering and EPC and infrastructure in the disclosed order book, despite the capacity addition from SISCOL.
Conclusion
The SISCOL acquisition gives Lloyds Enterprises group a controlling 87.45% stake in a structural-steel specialist with 100,000 MTPA of stated fabrication capacity, 187 executed projects and Rs 500 crore of H1 FY27 income. It lifts combined structural-fabrication capacity to 150,000 MTPA while placing the acquired business within an engineering platform with Rs 10,355 crore of orders.
The next disclosures to watch are management’s treatment of SISCOL’s Rs 1,260 crore order book within the group backlog and the cash-versus-share-swap composition of LEWL’s Rs 635.40 crore consideration. Management has cited future value-unlocking optionality, but the presentation does not give a timetable, synergy target or further fabrication-capacity plan.


