Steel Strips Wheels Says Rs 404 EBITDA Per Wheel Can Last
Key highlights
- Steel Strips Wheels reported Q2 FY27 EBITDA per wheel of Rs 404, up from Rs 242 a year earlier.
- Q2 FY27 revenue rose 61% year on year to Rs 1,930 crore, while profit after tax increased 209% to Rs 119 crore.
- Aluminium wheels contributed about 45% of Q2 FY27 revenue, with volumes reaching approximately 12 lakh units.
- Q2 FY27 export revenue grew 69% year on year to Rs 187 crore, supporting the company's Rs 600 crore FY27 export target.
powered by IRIS

Steel Strips Wheels Limited, referred to here as Steel Strips Wheels, says its Rs 404 earnings before interest, tax, depreciation and amortisation (EBITDA) per wheel in Q2 FY27 can be sustained because of operational gains rather than raw-material settlements. EBITDA per wheel rose from Rs 242 a year earlier, while an October debottlenecking lifted Mehsana aluminium-wheel capacity by 10%.
Know Steel Strips Wheels inside out
Results, valuation, peers and who's buying, in one view.
Is Rs 404 EBITDA per wheel sustainable for Steel Strips Wheels?
Steel Strips Wheels said Rs 404 EBITDA per wheel in Q2 FY27 should be sustainable and could rise if October momentum continues through November and December. The quarterly measure increased from Rs 242 in Q2 FY26, while standalone EBITDA margin, including other income, expanded to 12.3% from 9.6%.
Management said Rs 183 crore of supplementary invoicing during H1 FY27 was a delayed pass-through of raw-material price changes, not an addition to EBITDA or EBITDA per wheel. Steel Strips Wheels said raw-material selling-price adjustments are not always included in its monthly reporting because customer settlements take time, but the invoicing reflects costs already incurred in the six-month period.
H1 FY27 EBITDA per wheel was Rs 362, below the Q2 level but above the company's initial FY27 guidance of more than Rs 310. Revenue for the half year rose 44% to Rs 3,440 crore from Rs 2,387 crore, while standalone EBITDA including other income increased 68% to Rs 403 crore and margin rose to 11.7% from 10.1%.
What drove Steel Strips Wheels' Q2 FY27 margin increase?
Steel Strips Wheels attributed the Q2 FY27 margin increase to a richer aluminium-wheel mix, factory cost optimisation, export growth and customer price revisions for inputs other than raw materials. Quarterly revenue rose 61% year on year to Rs 1,930 crore, standalone EBITDA including other income increased 107% to Rs 237 crore, and profit after tax rose 209% to Rs 119 crore.
Aluminium wheels were the largest stated mix factor, accounting for about 45% of Q2 FY27 revenue and 42% of H1 FY27 revenue. Volumes reached about 12 lakh units in Q2 and 23 lakh units in H1, supported by passenger-vehicle premiumisation and the rising share of electric vehicles, although management also said higher aluminium prices supported revenue.
Management said the aluminium segment, comprising aluminium wheels and aluminium knuckles, generates EBITDA per wheel about 40% higher than the steel segment. In other businesses, Steel Strips Wheels said commercial-vehicle wheel demand grew 28% in the first six months, while its tractor-wheel market share increased to 45% from 43% and demand rose for high-vent-hole steel wheels.
Exports provided another contributor after a softer first quarter. Q2 FY27 export revenue grew 69% year on year to Rs 187 crore, taking H1 export revenue to Rs 314 crore, up 16%; management linked the recovery to diversification across Europe, Latin America and Asia and said it remained on track to exceed its Rs 600 crore FY27 export target.
Got a follow-up? Ask IRIS
How does Mehsana debottlenecking support EBITDA per wheel?
Steel Strips Wheels said its October 2026 Mehsana debottlenecking raised aluminium-wheel capacity by 10%, enabling capacity to move beyond 5 million wheels and potentially reach about 54 lakh wheels on an annualised basis. Management said the gain came from productivity improvements after orders exceeded available capacity, without material additional spending.
The Mehsana gain matters because Steel Strips Wheels described its alloy-wheel operations as running at near full utilisation before its Bhuj expansion. Management also cited more than 64% market share excluding Maruti and said higher wheel penetration at carmakers outside Maruti had supported demand for aluminium wheels.
Steel Strips Wheels' case is that higher factory output can support profitability without a raw-material windfall. Q2 FY27 revenue rose 61% while EBITDA rose 107%, and the per-wheel figure increased to Rs 404 from Rs 242; management linked that change to greater aluminium-wheel output, commercial-vehicle demand and exports.
This remains management's outlook rather than a revised formal annual target. Steel Strips Wheels said its H1 FY27 performance exceeded initial guidance of revenue growth above 20% and EBITDA per wheel above Rs 310, but it did not issue a new FY27 per-wheel EBITDA target.
Which expansion plans could influence Steel Strips Wheels' margins?
Steel Strips Wheels is adding capacity beyond Mehsana, with its Bhuj aluminium-wheel plant planned to add 12 lakh wheels annually and lift total aluminium-wheel capacity beyond 62 lakh wheels. Management expects commercial production at the Bhuj aluminium-knuckle facility in the last quarter of FY27 and aluminium-wheel production in early April 2027.
The Bhuj knuckle facility is planned for annual capacity of 11 lakh units. Steel Strips Wheels expects FY27 capital expenditure above Rs 600 crore, comprising Rs 420 crore for Bhuj, Rs 120 crore to add almost 5 lakh tractor-wheel sets at Dappar, and about Rs 70 crore for machinery replacement and automation.
A separate Sambhajinagar, Aurangabad greenfield project has Board approval subject to regulatory clearances. The Rs 1,400 crore project will be spread over 60 months, funded through debt, internal accruals and likely strategic investments, and is planned to produce alloy wheels, steel wheels and hot-stamped body structural parts.
Management said the hot-stamping investment is intended for a customer near the proposed Maharashtra facility and that it was discussing business with two more customers. Steel Strips Wheels is targeting investment of about Rs 170 crore, including land and building, and turnover close to Rs 400 crore, with production targeted around the fourth quarter of the next calendar year.
Conclusion
Steel Strips Wheels' Rs 404 Q2 FY27 EBITDA-per-wheel outlook rests on operating changes that management says are repeatable: aluminium wheels formed 45% of quarterly revenue, exports increased 69%, and Mehsana capacity rose 10% through debottlenecking. The company distinguishes these drivers from the Rs 183 crore H1 raw-material settlement, which it says had no bearing on EBITDA.
The next tests are demand through November and December, progress toward exceeding the Rs 600 crore FY27 export target, and the planned Bhuj production starts in the last quarter of FY27 and early April 2027. Investors will also be watching execution of more than Rs 600 crore of FY27 capital expenditure and regulatory clearances for the Rs 1,400 crore Sambhajinagar project.


