Timken India plans Bharuch GGB for bigger wind turbines
Key highlights
- Bharuch recorded Rs 75 crore of revenue in the reported quarter.
- Bharuch GGB investment totals Rs 70 crore across two product lines.
- Management reported utilisation of 50% to 60% for one Bharuch roller-bearing line and 70% for the other.
- Timken India said 5- and 6-megawatt wind gearboxes need larger carrier taper roller bearings.
powered by IRIS

At its quarter 2 financial-year call, Timken India Limited said Bharuch is preparing local GGB plain-bearing production backed by Rs 70 crore of investment, while 5- and 6-megawatt wind gearboxes will still require larger carrier taper roller bearings, according to management. The initial GGB supply is being imported before local output begins.
Know Timken India inside out
Results, valuation, peers and who's buying, in one view.
How is Timken India preparing GGB production at Bharuch?
Timken India is preparing Bharuch to produce GGB plain bearings locally, but management said the equipment has not yet been put into operation. Machines have arrived and are still being readied for runs, while the company is already winning orders and supplying GGB-branded products sourced from overseas. Management said Bharuch will eventually support a combination of imported and locally produced GGB products.
The local manufacturing activity is being undertaken by another Timken entity in India rather than Timken India itself, management said. Timken India’s stated role is to buy and sell the products. This distinction means the listed company can distribute locally made GGB products without directly operating the manufacturing entity responsible for the Bharuch localisation programme.
What changes when wind turbines move from 3 megawatts to 5 megawatts?
Timken India said India has progressed from sub-megawatt turbines to 3-megawatt platforms, while 5-megawatt turbines are entering the market. Management expects 3-megawatt and 5-megawatt machines to remain common in India for a long time. Globally, turbine ratings have reached 14 megawatts to 15 megawatts, and 8-megawatt turbines are already common, management said.
The shift changes bearing requirements by gearbox stage. Management said lower-load initial stages can use a plain bearing, including a brass sleeve, in place of a taper roller bearing. Some wind companies make these plain-bearing components themselves, it added. That substitution can reduce roller-bearing content in the lower stages of a gearbox as turbine designs become larger.
Carrier-bearing applications remain the central part of Timken India’s wind strategy. Management said taper roller bearings at the carrier position cannot currently be replaced by available technology. It added that 5- and 6-megawatt gearboxes need bigger carrier taper roller bearings, and said Timken India is concentrating on this application rather than depending on lower-stage roller-bearing demand.
What is the scale of the Bharuch GGB investment?
Management put the Bharuch investment for the two GGB product lines at Rs 35 crore each, or Rs 70 crore in total. It cited an asset-turn range of about 1.5 times to 2 times for the approved investment. Applying that range to Rs 70 crore indicates revenue capacity of Rs 105 crore to Rs 140 crore, but this is arithmetic based on management’s inputs rather than a disclosed revenue target.
Bharuch recorded Rs 75 crore of revenue in the reported quarter, although management did not identify the GGB contribution within that figure. It said it does not monitor or disclose margins by plant because the business is reported as one segment. Management nevertheless said that higher occupancy and capacity utilisation at Bharuch should improve margins over time.
The Rs 75 crore quarterly revenue figure should not be treated as evidence that local GGB output has started. Management specifically said the GGB machines are present but have yet to be run. Current GGB orders are being served from overseas supply, so the Rs 70 crore investment remains a manufacturing-readiness programme rather than proof of completed local production or qualification.
Got a follow-up? Ask IRIS
What does Bharuch’s current ramp-up indicate?
Timken India said Bharuch is ramping up with sales tilted toward intercompany exports in the reported quarter. Domestic qualification work is under way, while exports currently account for most sales from the cylindrical and spherical roller-bearing lines. Management said industrial applications generally have better overall margin behaviour than automotive applications, without giving separate Bharuch margins.
Management put utilisation for the cylindrical roller-bearing line at about 50% to 60% and for the spherical roller-bearing line at 70%. It indicated overall utilisation could be 70% to 75% by the end of the financial year. The spherical roller-bearing line was therefore running about 10 to 20 percentage points above the cylindrical roller-bearing line at the time of the call.
Management also warned that the last quarter of the calendar year normally sees some softening because of export seasonality and December year-end effects. That means the route from 50% to 60% utilisation in one line and 70% in the other may not be even across quarters. The pace of export demand and domestic qualification will affect how quickly Bharuch reaches the stated 70% to 75% overall level.
Why is wind important to Timken India’s process-industries business?
Timken India said wind is performing well within its processing business. Management attributed part of the opportunity to Chinese and other manufacturers moving gearbox production into India. It described the process-industries outlook excluding the two Bharuch roller-bearing lines as stable and said the company is positioned in gearbox applications.
Management said domestic wind demand had previously been sluggish, with gearbox makers such as ZF and Flender producing largely for export. It now sees domestic wind demand and Indian wind companies picking up, alongside export activity. The company linked this view to expanding electricity needs, including data centres, and the need to reduce thermal-power generation, but it did not disclose a wind-revenue target, market share or capacity forecast.
Timken India said it focuses on gearbox applications rather than generally pursuing wind main-shaft positions. Management described some main-shaft work as commoditised and said the company would participate where it could make money. It also said sister concerns are investing in larger bearing sizes domestically, while Timken India buys and sells wind-bearing products rather than manufacturing them itself.
Conclusion
Timken India’s Bharuch plan addresses both sides of a changing wind-gearbox design. Lower-stage roller-bearing demand can be replaced by plain-bearing sleeves, but management said carrier taper roller bearings remain necessary and become larger in 5- and 6-megawatt gearboxes. The Rs 70 crore GGB investment adds a potential local supply route while Bharuch continues to ramp its existing bearing lines.
The next points to watch are whether the Bharuch GGB machines enter production after the current imported-product phase, and whether domestic qualification expands beyond the export-led sales mix. Management also pointed to 70% to 75% overall utilisation by the end of the financial year, following reported utilisation of 50% to 60% for one roller-bearing line and 70% for the other.


