MM Forgings targets ₹50 crore-₹100 crore from new press
Key highlights
- MM Forgings expects Q4 FY27 commissioning and Q1 FY28 SOP for its 16,500-tonne press.
- MM Forgings targets ₹50 crore-₹100 crore of initial annualised revenue from the new press.
- Management indicated a ₹250 crore-₹400 crore longer-term press revenue range that may require added machining investment.
- MM Forgings expects FY28 turnover of ₹2,400 crore-₹2,500 crore and sales volume above 100,000 tonnes.
powered by IRIS

In Q4 FY27, M M FORGINGS LIMITED expects to commission its 16,500-tonne heavy-forging press, which management said can initially generate annualised revenue of ₹50 crore-₹100 crore after start of production in Q1 FY28. The largely uncommitted press is intended to support growth beyond MM Forgings’ ₹2,400 crore-₹2,500 crore FY28 turnover outlook.
Know M M Forgings inside out
Results, valuation, peers and who's buying, in one view.
When will MM Forgings’ 16,500-tonne press start production?
MM Forgings expects to commission the 16,500-tonne press in Q4 FY27 and begin production, or start of production (SOP), in Q1 FY28. Management gave that timetable in its November 13, 2026 earnings call, covering the quarter ended September 30, 2026, and described the press as a growth driver beyond the ₹2,400 crore level.
Commissioning and SOP are separate stages in the plan. Management said original equipment manufacturer (OEM) qualification for heavy parts can take from six months to two years, depending on the OEM, the depth of engagement and the launch schedule for a particular component. As a result, the press can begin operating in Q1 FY28 while customer approvals and programme volumes continue to build.
Some existing parts can move directly to the 16,500-tonne press because their qualification is “almost pre-done”, according to management. MM Forgings said parts that cannot be produced on its 8,000-tonne press would move to the larger machine, creating an initial route to utilisation before new heavy-forging programmes are approved.
How much revenue can MM Forgings’ new press add?
MM Forgings expects the 16,500-tonne press to generate ₹50 crore-₹100 crore of annualised revenue initially and ultimately support ₹250 crore-₹400 crore. Management did not specify a year for reaching the higher range and said that outcome may require additional machining investment as well as new parts.
The initial ₹50 crore-₹100 crore run rate is modest beside MM Forgings’ FY28 turnover outlook of ₹2,400 crore-₹2,500 crore. Management said orders are available up to the ₹2,500 crore projection, while growth above that level depends on new orders, including those enabled by the 16,500-tonne press. The press is therefore not presented as essential to meeting the stated FY28 order outlook.
The difference between the initial run rate and the ₹250 crore-₹400 crore longer-term range reflects the press’s largely uncommitted status. Management said the asset remains “largely unsold”, making its later ramp dependent on programme awards, OEM qualification, product-launch timing and the machining capacity required to process additional heavy parts.
Got a follow-up? Ask IRIS
Can MM Forgings meet its FY28 plan before the press fully ramps?
MM Forgings said its existing forging base can support about 120,000 tonnes, compared with its expectation of more than 100,000 tonnes in FY28. Its stated FY27 sales expectation is 90,000-95,000 tonnes, while management expects FY28 turnover of ₹2,400 crore-₹2,500 crore, providing a near-term route to that plan without a full heavy-press ramp.
Total forging capacity was 130,000 tonnes after MM Forgings added a 4,000-tonne press at its Viralimalai plant, up from 120,000 tonnes. Management put annualised capacity at 127,500 tonnes because the Viralimalai addition became available only in Q2 FY27. The 16,500-tonne press extends the size range of parts the company can make rather than simply adding capacity for existing work.
Machining remains an associated investment requirement. Management said machining utilisation was about 75%-80% and that machining represented 65% of sales, up from about 56%. It was adding machining lines for existing-product expansions, new products and new customers, but said it had not yet determined a single overall machining-capacity figure.
MM Forgings has invested more than ₹1,200 crore over the past six years, with a significant portion of more than ₹750 crore directed to forging and machining. Management said its completed and ongoing machining additions should support ₹2,400 crore-₹2,500 crore of revenue, provided market demand matches the customer job mix it has planned.
What will determine MM Forgings’ heavy-press ramp?
MM Forgings said OEM qualification, new-order wins and machining additions will determine how quickly the new press approaches its ₹250 crore-₹400 crore revenue range. Already qualified parts can provide the ₹50 crore-₹100 crore initial annualised bridge, but management said new orders are needed for growth beyond ₹2,500 crore.
Management linked much of the opportunity after FY28 to export markets. It said heavier parts would allow MM Forgings to engage larger truck OEMs globally, while about 99% of current heavy-forging output is sold in the domestic market. Management expects export revenue to double or triple from current levels over the next few years and potentially reach ₹1,000 crore, which is an expectation rather than formal guidance.
Export demand also has cyclical exposure. Management said North American Class 8 truck demand is being supported by replacement demand and some pre-buying before emission-norm changes, but it expects the pre-buy effect to disappear by Q1 FY28. It described the North American truck market as cyclical and said it would not call the market an upcycle, although it did not expect a hard subsequent fall.
MM Forgings reported H1 FY27 turnover of ₹978 crore on about 44,000 tonnes of sales, including Q2 sales of ₹551 crore and 24,200 tonnes, compared with 19,700 tonnes in Q1. Q2 earnings before interest, tax, depreciation and amortisation (EBITDA) were ₹110 crore, or about 20%, while sales realisation was ₹2.23 lakh per tonne and exports accounted for 34% of sales.
Conclusion
MM Forgings’ 16,500-tonne press is a longer-term product-range and capacity expansion rather than the central source of its FY28 turnover target. Management has identified an initial ₹50 crore-₹100 crore annualised revenue opportunity through existing parts, while the ₹250 crore-₹400 crore range depends on customer approvals, further machining work and new programme awards.
The disclosed milestones are Q4 FY27 commissioning and Q1 FY28 SOP. The next issues to watch are whether MM Forgings converts the largely uncommitted press into new orders, provides the promised overall machining-capacity measure on a future call, and progresses toward more than 100,000 tonnes of sales and ₹2,400 crore-₹2,500 crore of turnover in FY28.


