MM Forgings targets Rs 1,000 crore export revenue growth
Key highlights
- MM Forgings targets about Rs 1,000 crore in export revenue over the next few years, compared with an annualised Rs 600 crore currently.
- MM Forgings' U.S. sales share increased to 16.5% from 12.5% in FY26, while Europe increased to 13% from 12%.
- MM Forgings plans to commission its 16,500-ton press in Q4 FY27 and start production in Q1 of the next fiscal year.
- Management expects the heavy press to initially generate annualised revenue of Rs 50 crore to Rs 100 crore, with potential for Rs 250 crore to Rs 400 crore over time.
powered by IRIS

MM Forgings Limited is targeting about Rs 1,000 crore in export revenue over the next few years, up from an annualised Rs 600 crore currently, as management pursues global truck original equipment manufacturers, or OEMs, expands European engagement and prepares to produce heavier components on its 16,500-ton press.
Know M M Forgings inside out
Results, valuation, peers and who's buying, in one view.
What is MM Forgings' export revenue target?
MM Forgings is targeting about Rs 1,000 crore of export revenue over the next few years, management said on its Q2 FY27 earnings call. The company put its current annualised export revenue at roughly Rs 600 crore and said a significant part of growth from FY28 onward should come from overseas markets.
Management also cited an export aspiration of Rs 1,200 crore to Rs 1,500 crore by the end of the decade or earlier. That longer-range figure was presented as management’s view of the opportunity, rather than formal guidance. The strategy includes exports of heavy forgings, broader forged products and expansion in non-auto applications.
Why does MM Forgings expect export revenue to grow?
MM Forgings expects export revenue to grow through engagement with several multinational OEMs and a wider range of components made for overseas truck customers. Management said the new heavy press should allow it to supply global truck OEMs with more parts instead of being limited to a narrower component set.
Heavy Forgings is a principal part of this opportunity because management said about 99% of its output is currently sold in India. Exporting heavier axle beams, crankshafts and other parts could therefore increase overseas sales from a low existing base. Management said its foray into heavier parts could also improve commercial-vehicle, or CV, penetration in Europe and the United States.
MM Forgings remains concentrated in automotive products, which accounted for 85% of sales, including 70% from CVs and 14% from passenger vehicles. Off-highway represented 14%, while management said non-auto sales were about 15%. Management intends to increase non-CV and non-auto business alongside geographical expansion to reduce dependence on any single market or vehicle category.
Which export markets are driving MM Forgings' growth?
North America and Europe are driving MM Forgings’ export strategy, with the United States sales share rising to 16.5% from 12.5% in FY26 and Europe rising to 13% from 12%. India’s share declined to 67% from 72%, reflecting faster growth from overseas markets during the period discussed by management.
Management said U.S. Class 8 truck demand was running strongly, supported by replacement demand after a subdued period and by some emission-rule-related pre-buying. It said the reduction in U.S. customs duties from April coincided with higher demand, but did not attribute the demand increase solely to lower tariffs because customers had continued buying despite the tariff.
Management expects the pre-buy effect in North America to fade by the first quarter of the next fiscal year. It described the Class 8 market as cyclical and did not forecast an upcycle, saying only that the subsequent fall may not be hard because replacement demand should remain. This makes the timing of new OEM programmes relevant to export execution.
Europe is structurally different, according to management, because its CV market is largely replacement-driven rather than led by pre-buy surges. MM Forgings said it has been deepening engagement with European OEMs and sees scope to expand its heavy-parts offering there. Europe’s 13% sales share was 1 percentage point above FY26, versus a 4-percentage-point increase in the U.S. share.
Got a follow-up? Ask IRIS
How will the 16,500-ton press support MM Forgings' exports?
MM Forgings expects the 16,500-ton press to expand its export addressable market by making parts that cannot be produced on its 8,000-ton press. Management plans to commission the equipment in Q4 FY27 and begin start of production, or SOP, in Q1 of the next fiscal year.
The company expects an initial annualised revenue run rate of Rs 50 crore to Rs 100 crore from the press, including certain existing components that can move to the new equipment with qualifications substantially completed. Management said the press could eventually generate Rs 250 crore to Rs 400 crore annually, although that would require additional machining investment and new component programmes.
The press is largely unsold at present, and qualification for new OEM parts can take six months to two years, depending on the customer relationship and part launch. Management described the press as the growth driver beyond its FY28 revenue outlook of Rs 2,400 crore to Rs 2,500 crore, while saying orders are already available up to that projected revenue range.
What could limit MM Forgings' export expansion?
MM Forgings’ export expansion depends on securing new orders beyond the Rs 2,400 crore to Rs 2,500 crore FY28 revenue visibility disclosed by management. The company expects FY27 sales volume of 90,000 to 95,000 tons and FY28 volume above 100,000 tons, subject to global CV-market cyclicality and the planned job mix.
Manufacturing capacity provides room for growth, but machining additions remain ongoing. Forging capacity rose to 130,000 tons after a 4,000-ton press was added at Viralimalai, while management said its existing capacity could support about 120,000 tons. Machining utilisation was about 75% to 80%, and management said lines were being added for existing products, new products and new customers.
Management said its plan to diversify CV sales across multiple geographies and increase non-CV exposure should improve revenue predictability over the next two to three years. However, it also noted that major markets can move together in a cycle. The timing of heavy-press approvals, North American demand after pre-buying and European OEM programme wins will therefore influence the export ramp.
Conclusion
MM Forgings’ export plan combines a current annualised Rs 600 crore base, a target of about Rs 1,000 crore in the next few years and an aspiration of Rs 1,200 crore to Rs 1,500 crore by the end of the decade or earlier. The company is seeking this growth through global OEM relationships, a heavier-component portfolio and increased exposure to North America and Europe.
The next disclosed milestones are commissioning of the 16,500-ton press in Q4 FY27 and its planned SOP in Q1 of the next fiscal year. Investors will also watch qualification progress within the stated six-month-to-two-year range, new orders beyond FY28 visibility of Rs 2,400 crore to Rs 2,500 crore, and North American replacement demand after the pre-buy effect fades.


