Mold-Tek Technologies Limited targets US$5-10m electrical opportunity
Key highlights
- MTTL identifies a US$5-10 million potential annual opportunity in US electrical engineering.
- MTTL has started with 10 electrical engineers and plans to scale towards about 20.
- The US power transmission and distribution market is projected to rise from US$63.22 billion in 2024 to US$76.54 billion by 2030.
- MTTL's Q2 FY27 revenue from operations rose 51.2% year on year to Rs 60.81 crore.
powered by IRIS

MTTL is targeting a US$5-10 million annual addressable opportunity in US electrical distribution, transmission and substation engineering, supported by a new client engagement, an initial 10-engineer team and a plan to scale towards about 20 engineers. MTTL has also established training focused on American electrical design standards.
Know Mold-Tek Technologies inside out
Results, valuation, peers and who's buying, in one view.
What is MTTL's US electrical engineering opportunity?
MTTL identifies a potential annual opportunity of US$5-10 million in electrical distribution, power transmission and substation design in the US. The presentation separately describes this range as the serviceable addressable market, or SAM, for MTTL, rather than as booked revenue, order backlog or signed contract value. Management characterises the opportunity as having attractive profit margins, but does not disclose an expected margin percentage for the new vertical.
The target sits within a larger US power transmission and distribution market that MTTL says was worth US$63.22 billion in 2024 and is projected to reach US$76.54 billion by 2030, a 3.3% compound annual growth rate. Transmission lines were the largest asset segment in 2024, while the presentation expects distribution lines to be the fastest-growing segment. MTTL links demand to data-centre power needs, grid modernisation, transmission expansion, distribution infrastructure and industrial electrification.
The stated US$5-10 million range is much smaller than the US$63.22 billion market estimate because it reflects MTTL's identified annual addressable scope rather than the entire industry. The presentation does not quantify work converted from this opportunity, identify the new client or give a timetable for reaching the upper end of the range.
How is MTTL building electrical engineering capacity?
MTTL has initiated engagement with a new US client and formed an initial electrical-engineering team of 10 engineers. The stated work areas are electrical distribution, power transmission and substation design. This is an operating step beyond market assessment, although the presentation does not disclose the client's identity, contract duration, project value or number of assignments underway.
MTTL plans to scale the team towards about 20 engineers and has established a dedicated training programme in American electrical design standards. MTTL also says it is adding additional teams for large US distribution companies. The sequence outlined is capability building, client engagement and team expansion, rather than an announced acquisition or quantified capital-expenditure programme for the vertical.
The plan follows MTTL's repositioning of its Mechanical Engineering Services business away from dependence on electric-vehicle programmes. MTTL says it rationalised underutilised automotive manpower and high-cost automotive software, then reallocated engineering talent to poles and towers, substation design, electrical distribution, plant engineering and general engineering. The planned 20-person electrical team is therefore part of a wider redeployment of engineering resources.
Got a follow-up? Ask IRIS
How does MTTL's new vertical change its service mix?
MTTL is adding electrical engineering to an existing platform comprising civil and structural engineering and a mechanical division under repositioning. Its FY26 baseline described an established Civil & Structural Engineering platform, the Mechanical Engineering repositioning, expansion of the US engineering platform through Beryl Project Engineering, and an emerging Electrical Engineering vertical. The new initiative specifically widens MTTL's exposure to distribution, transmission and substation work.
The civil and structural business addresses a different US market opportunity. MTTL cites a US structural steel market of US$7.60 billion in 2024, projected to reach US$10.74 billion by 2030 at a 6.8% compound annual growth rate. Its listed services include structural steel detailing, building information modelling, or BIM, 3D modelling, pre-engineered metal building detailing, connection and member design, residential engineering, and transmission and tower engineering.
Beryl Project Engineering brought more than 14 years of residential-engineering experience in Florida and about 40 US employees at acquisition. Its services include residential engineering, building inspection, permit engineering, government and regulatory services, and plan review. Beryl Project Engineering's entry into Forsyth County, Georgia extends MTTL's footprint beyond Florida, while the electrical team provides a separate route into power-infrastructure engineering.
For FY28, management lists scaling Electrical Engineering, deeper penetration of US engineering markets, Beryl Project Engineering and Georgia contribution, further Mechanical Engineering diversification, and higher-value assignments among its priorities. These are management outlook items, not reported outcomes. The presentation also mentions potential contribution from a strategic acquisition, without naming a target or setting a transaction timetable.
What financial performance has MTTL reported during the expansion?
MTTL reported higher consolidated revenue and profitability in Q2 FY27 than in Q2 FY26 while the electrical vertical was being built. Revenue from operations increased 51.2% to Rs 60.81 crore, while earnings before interest, tax, depreciation and amortisation, or EBITDA, rose 144.5% to Rs 14.58 crore. Profit after tax, or PAT, increased 197.3% to Rs 9.62 crore.
The H1 FY27 comparison shows revenue from operations up 63.7% to Rs 120.35 crore, EBITDA up 239.1% to Rs 28.49 crore and PAT up 375.1% to Rs 18.62 crore. EBITDA margin rose from 11.4% in H1 FY26 to 23.7% in H1 FY27, while PAT margin increased from 5.3% to 15.5%. The presentation does not allocate any of these reported results to the electrical vertical.
Management's FY27 outlook calls for EBITDA margin of 20% or more, revenue growth of 20-25% compound annual growth rate from FY26 to FY28, and PAT margin of 15-16% in FY27-FY28. Q2 FY27 EBITDA margin was 24.0% and H1 FY27 EBITDA margin was 23.7%, compared with the stated 20% threshold, but the FY27-FY28 measures remain management guidance.
Conclusion
MTTL's electrical-engineering initiative creates a new US service line alongside civil, structural, residential and repositioned mechanical work. The company has defined a US$5-10 million annual addressable opportunity, started a new client engagement and assembled 10 engineers, against a stated US power transmission and distribution market forecast to grow from US$63.22 billion in 2024 to US$76.54 billion by 2030.
The next disclosed milestones are expansion of the electrical team towards about 20 engineers, additional teams for large US distribution companies and management's FY28 objective of scaling Electrical Engineering. The unresolved matters are conversion of the identified opportunity into work and the revenue or margin contribution of the vertical, neither of which MTTL separately discloses.


