TNB plans 10,000 MTPA expansion targeting ₹135-150 crore
Key highlights
- TNB plans to add 10,000 MTPA, lifting installed capacity from about 26,500 MTPA to about 36,500 MTPA.
- Management estimates ₹135-150 crore of revenue potential at full utilisation, with the major contribution expected in FY28.
- PP honeycomb sheets are the largest listed addition at 4,350 MTPA, followed by PP corrugated sheet at 2,175 MTPA.
- TNB plans to start commercial production of 2,055 MTPA of HDPE drums in the last week of March 2027.
powered by IRIS

Shree TNB Polymers Limited plans to add about 10,000 metric tonnes per annum (MTPA), lifting installed capacity from about 26,500 MTPA to about 36,500 MTPA; management estimates ₹135-150 crore of revenue potential at full utilisation, with a partial FY27 contribution and the major portion expected in FY28.
Know Shree TNB Polymers inside out
Results, valuation, peers and who's buying, in one view.
How much capacity is TNB adding?
TNB is adding about 10,000 MTPA, taking total installed capacity from about 26,500 MTPA to about 36,500 MTPA. The new lines extend the product range beyond NOBLE pipes, TIRUPATI sheets and WELLPACK boards into polypropylene, or PP, honeycomb sheets, corrugated sheets, blow-moulded high-density polyethylene, or HDPE, drums, and plastic pallets.
The five listed capacity additions total 10,000 MTPA. PP honeycomb sheets account for 4,350 MTPA, the largest component, followed by PP corrugated sheet at 2,175 MTPA. The 210-litre and 60-litre drum lines together add 2,055 MTPA, while plastic pallets contribute 1,420 MTPA.
TNB’s existing 26,500 MTPA base operates across two manufacturing units in Silvassa, at Atal and Masat. The company acquired the Masat pipe unit in March 2025 and started its third pipe line in February 2026, so the planned addition is about 38% of current installed capacity based on the stated figures.
What revenue could TNB generate from the new capacity?
TNB management estimates ₹135-150 crore of revenue potential at full utilisation of the new capacity. The presentation labels this amount indicative and says actual outcomes may differ, so it is a management estimate rather than reported revenue or a committed sales target.
Management expects the new lines to contribute partly in FY27 and mostly in FY28. The disclosed estimate is therefore linked to full utilisation over time, rather than a forecast for the current financial year, and TNB has not provided a revenue estimate for each product line.
For comparison, TNB reported H1 FY2026-27 revenue of ₹86.08 crore, earnings before interest, tax, depreciation and amortisation (EBITDA) of ₹7.57 crore, and profit after tax of ₹2.58 crore. The proposed ₹135-150 crore revenue potential is separate from those H1 results and depends on approvals, commissioning and subsequent utilisation.
Which products are included in TNB’s expansion?
TNB’s expansion includes PP honeycomb sheets, PP corrugated sheet, HDPE drums and plastic pallets, broadening its packaging and industrial range. The presentation also describes PP Bubble Guard sheets as multi-layer PP boards with a honeycomb or bubble core between two flat layers and lists capacity of about 4,350 MTPA for that product.
TNB identifies uses for Bubble Guard sheets in pallet liners, layer pads, returnable boxes, coil guards, construction surface protection, automotive components, battery packaging and display boards. Its stated product features include a high strength-to-weight ratio, shock absorption, water resistance and reusability through air-lock technology.
The drum operation will include 60-litre and 210-litre closed-head and open-head formats. TNB says the 60-litre format is intended for manual handling, smaller batches and specialty additives, while 210-litre drums are designed for palletised bulk freight, forklifts and exports; the listed end markets include chemicals, pharmaceuticals, food and beverage, agrochemicals, lubricants and fast-moving consumer goods.
TNB has separately started commercial production of medium-density polyethylene, or MDPE, pipes under Bureau of Indian Standards (BIS) licence IS 14885:2022. MDPE pipes are not included in the five-line capacity table, but they take TNB into city gas distribution networks, and management’s H2 FY27 roadmap calls for scaling up this segment.
Got a follow-up? Ask IRIS
When will TNB start production at the new facility?
TNB says Phase 1 of its new Athal facility is structurally complete, but production will start only after statutory approvals are received. The new site covers 10,111 square metres of leased land, is planned for phased development, and Phase 1 has been funded entirely from internal accruals.
After approvals, TNB plans to begin production and raise output progressively as machinery is commissioned. This means a completed structure is not the same as fully operating capacity, and the presentation gives no date for receipt of approvals or for full commissioning of all 10,000 MTPA.
TNB provides a more specific timetable for drums: commercial production of blow-moulded HDPE drums is scheduled for the last week of March 2027. That milestone covers the 2,055 MTPA combined capacity for 210-litre and 60-litre drums, while the broader facility ramp-up remains conditional on approvals and machinery commissioning.
What must happen for TNB to reach its FY28 revenue potential?
Statutory approvals, machinery commissioning and a progressive commercial ramp-up must occur for TNB to pursue the estimated ₹135-150 crore potential. Management expects only a partial contribution in FY27 and the major portion in FY28, setting out a phased timeline rather than an immediate increase in output.
TNB’s immediate roadmap also prioritises existing order execution. The company reported an order book of ₹64.23 crore as of November 14, 2026, executable over the following two to three months, and turnover of about ₹32 crore excluding goods and services tax in the six weeks from October 1 to November 13, 2026.
The order pipeline included ₹50.99 crore of fresh HDPE pipe orders dated September 19, 23 and 26, 2026. These comprised a ₹25.48 crore tank-connection pipeline order in Gujarat, a ₹1.91 crore power-distribution order related to Adani Electricity Mumbai, and a ₹23.60 crore power-distribution order related to Tata Power; TNB also released 42,405 metres of PE-100 pipes valued at about ₹9.70 crore for dispatch after joint inspection on October 5-6, 2026.
Conclusion
TNB’s planned expansion would lift installed capacity from about 26,500 MTPA to about 36,500 MTPA while adding drums, honeycomb products, corrugated sheets and pallets to its existing pipes, sheets and boards portfolio. Management’s ₹135-150 crore full-utilisation estimate is principally an FY28 opportunity and depends on commercial adoption of these new lines.
The next disclosed milestones are statutory approvals for Phase 1, commissioning of machinery, scaling MDPE pipe production in H2 FY27 and the planned last-week-of-March-2027 start of drum production. Execution of the ₹64.23 crore order book, which management said was due over two to three months from November 14, 2026, is the nearer-term operational item to watch.


