Dhaval Packaging Targets 35%-40% Revenue Lift From Metal Line
Key highlights
- Dhaval Packaging management targets a 35%-40% revenue increase from the new metal-packaging line.
- Dhaval Packaging said its new facility was 75%-80% complete on November 14, 2026, with readiness targeted for March 2027.
- Dhaval Packaging spent Rs 9.18 crore on plant, machinery and buildings in April to September 2026.
- Dhaval Packaging's first-half FY27 IML and other plastic-products profit rose 39% to Rs 5.78 crore.
powered by IRIS

Dhaval Packaging Limited said on November 14, 2026 that its planned two-piece DRD metal food-container line could increase revenue by 35%-40% after the facility becomes ready for use by March 2027. Management said the project was 75%-80% complete, but did not disclose production capacity, revenue in rupees or a quantified margin target.
Know Dhaval Packaging inside out
Results, valuation, peers and who's buying, in one view.
What is Dhaval Packaging launching in March 2027?
Dhaval Packaging is planning to launch two-piece DRD metal food containers through a new packaging line expected to be ready by March 2027. Management said it had already ordered machinery for the project and described the line as a new product category alongside its established in-mold labelling, or IML, plastic containers and End Caps.
Dhaval Packaging said the metal containers are intended for food packaging, citing demand for superior packaging as mithai prices rise. Management said it had discussed the forthcoming products with customers in India and overseas, who had asked for the offering to be introduced quickly. The call did not identify those customers, state whether orders had been signed, or provide expected container volumes.
The product broadens Dhaval Packaging's existing segment mix. IML and other plastic products are used in ice-cream tubs, sweet boxes, curd cups and food packs, while End Caps are supplied to submerged arc welded, or SAW, pipe manufacturers. In the six months from April to September 2026, IML and other plastic products recorded sales of Rs 26.01 crore, compared with Rs 8.79 crore for End Caps.
When will Dhaval Packaging's metal facility be ready?
Dhaval Packaging said on November 14, 2026 that its new facility was 75%-80% complete and would be ready for use by March 2027. Management also said the plant under construction and newly ordered machinery would add capacity once completed, placing the stated commissioning target roughly four months after the Q2 FY27 call.
During the April to September 2026 half year, Dhaval Packaging spent Rs 9.18 crore on plant, machinery and buildings. Management did not allocate that amount between the metal-container line, IML capacity and other facility requirements. The disclosed expenditure therefore shows the scale of the wider expansion programme rather than the standalone cost of the two-piece DRD project.
The company entered the buildout after raising about Rs 36.30 crore through its initial public offering, or IPO, on August 6, 2026. Dhaval Packaging issued 37,48,800 shares at Rs 97 each and said the funds would support capacity building and lower its dependence on bank loans.
Dhaval Packaging said its own funds more than doubled between March and September 2026, while loans declined by Rs 3.39 crore. Management said the debt-to-own-funds relationship was about 31 paise of loans for every rupee of own funds in September, compared with about 79 paise six months earlier.
How much revenue growth does Dhaval Packaging expect from metal packaging?
Dhaval Packaging is targeting a 35%-40% revenue increase from the new metal-packaging capacity, according to management’s responses to investors on November 14. In one answer, management said it expected a 35%-40% hike in revenue in “Q1 of 2027” from the metal technology and food containers; in another, it referred to at least a 35%-40% increase across H1 and H2 after operations begin.
The call did not define the revenue base for that percentage, specify whether it applies to total company revenue or the new facility, or provide a target in rupees. Management later described the 35%-40% figure as its focus for FY27’s first half, while also saying it would not forecast FY28 until it had assessed customer response, client additions and the FY27 rollout.
IML is also part of Dhaval Packaging's near-term growth plan. Management said it was in discussions with Latin American and United Kingdom customers on IML projects that could run throughout the year and occupy four to six machines. If those discussions result in business before the new facility is operating, management said it could consider using rented premises and deploying machinery earlier.
Management also said IML demand from January to June could rise on supplies to ice-cream customers including Havmor and Sheetal Ice Cream, and said it was going to sign a contract with Vadilal. These discussions and plans are separate from the metal-container launch, and their outcome was not quantified in the call.
Got a follow-up? Ask IRIS
Will Dhaval Packaging's metal line have higher margins than IML?
Management expects the metal line to deliver a higher profit margin than IML, but Dhaval Packaging has not provided a numerical margin range. In response to an investor question on November 14, management said it was too early to discuss the margin profile and would provide an update after machinery installation and startup during FY27.
Management based its expectation on its view that the two-piece DRD line would be a first-of-its-kind offering in India. That is management’s assessment rather than a reported financial outcome. Dhaval Packaging has not disclosed metal-container production, realised selling prices, raw-material costs or customer contracts that would allow a comparison with the existing IML business.
IML provides the available financial reference point. In the first half of FY27, IML and other plastic-products profit rose 39% to Rs 5.78 crore from Rs 4.15 crore a year earlier, while sales increased about 4% to Rs 26.01 crore. Management attributed the profit increase to bulk purchases of plastic granules, selling prices aligned with market rates and its “one machine, one mold” focus.
Dhaval Packaging also said it was passing material-price increases through to IML customers during the festival season. Management said its IML customer relationships span 25 years and that packaging was a small part of the value of the mithai sold by customers. The call did not say whether metal containers will have a comparable pricing mechanism.
What could affect Dhaval Packaging's March 2027 rollout?
The immediate execution requirement is for Dhaval Packaging to complete construction, install the ordered machinery and begin operations by March 2027. Although management put completion at 75%-80% on November 14, it did not disclose trial-production dates, designed capacity, expected utilisation or a timetable for customer approvals.
Working-capital collection is another disclosed issue. Dhaval Packaging said customer receivables rose from about Rs 8 crore to about Rs 13 crore over the preceding six months, reducing cash generated from day-to-day operations in the April to September 2026 period. Management attributed the increase partly to Diwali-season IML sales and said it was tightening credit terms while seeking faster collections after the festival.
End Caps remain exposed to pipe-customer activity and transport conditions. First-half FY27 End Caps sales were Rs 8.79 crore, about 7% below the prior year, while profit declined about 19% to Rs 2.47 crore from Rs 3.50 crore. Management cited higher container transportation rates and disruption linked to the Iran crisis, although it said End Caps sales were about 8% higher than in the previous six months.
Conclusion
Dhaval Packaging is tying its next expansion phase to a March 2027 metal-container launch, with management targeting a 35%-40% revenue increase and expecting margins above IML. The plan is supported by a facility reported as 75%-80% complete and Rs 9.18 crore of April to September 2026 investment, but sales capacity, revenue in rupees and realised margins remain undisclosed.
The next disclosed milestone is the March 2027 readiness target for the new facility and machinery. Investors can also watch for management’s FY27 update on metal-line revenue and margins, collections after receivables reached about Rs 13 crore, and whether discussions with Latin American and United Kingdom IML customers translate into orders.


