Millworks Expects December Recovery of Rs 86.88 Crore
Key highlights
- Millworks expects Rs 86.88 crore from Quick Pay to be recovered in December.
- Quick Pay represented Rs 86.88 crore of roughly Rs 142 crore total receivables cited on the call.
- Millworks paid Rs 10.59 crore in advances for Quick Pay’s licensed procurement of electronic components.
- Millworks changed certain European export terms to a 30% advance and payment within 30 to 45 days of invoicing.
powered by IRIS

Millworks Technologies Limited expects to recover Rs 86.88 crore from Quick Pay in December, management said, after the receivable had been outstanding for more than six to eight months and contributed to an audit qualification. Management attributed the issue to defense-order completion documentation and receivable ageing beyond 180 days.
Know Millworks Technologies inside out
Results, valuation, peers and who's buying, in one view.
What caused Millworks’ audit qualification?
Millworks said the qualification arose from uncertainty over defense-order completion and receivables outstanding beyond 180 days. Management said auditors visited Quick Pay’s facility, inspected inventory and parts, and reviewed purchase orders and the Government of India project report. However, management said auditors required additional documentary evidence that assemblies had been delivered and accepted by the Indian Army.
Millworks said the work relates to an electronic-warfare defense project with a lengthy inspection process. Management cited around 17 inspections for the order already delivered, involving personnel travelling across the country or visiting its Noida facility. It said components were supplied to Quick Pay at the end of March, but acceptance documentation for the overall assembly had not been received in time.
Management said receivable ageing was a separate reason for the qualification, because the balance had crossed 180 days. It told investors that the parts were received by Quick Pay and that auditors had inspected the related inventory. The planned December payment is therefore important because it would test management’s explanation that the delay reflects the defense project’s inspection and documentation cycle rather than an unresolved supply issue.
How large is Millworks’ exposure to Quick Pay?
Millworks’ identified Quick Pay receivable was Rs 86.88 crore, compared with roughly Rs 142 crore of total receivables cited by an analyst on the call. The analyst calculated Rs 55.17 crore of receivables outside Quick Pay and asked about balances overdue for more than six months. Management replied that it received substantial collections in October and the first week of November and expected to narrow outstanding balances in the first week of December.
Millworks holds around an 8% stake in Quick Pay, which management said it acquired when Quick Pay had an order for about 960 loitering-munition drones. Millworks subsequently supplied components to Quick Pay under a backward-integration arrangement. Management described the largest delayed balance as tied to one Indian defense order, rather than a broad set of unrelated customers.
The relationship also includes Rs 10.59 crore of advances paid by Millworks to Quick Pay. Management said the advances funded electronic components, including Global Positioning System, or GPS, items that Quick Pay had to procure in its own name under its defense licence and contract requirements. Millworks said it could not procure those items in its own name and supply them onward, leaving both receivables and procurement advances connected to the same project.
Got a follow-up? Ask IRIS
How is Millworks changing export collection terms?
Millworks has changed payment terms for exports from a specific European country to require a 30% advance with the purchase order and settlement within 30 to 45 days from invoicing. Management said the revised terms replaced conditions linked to receipt and other factors, and were intended to correct the collection issue raised by investors. It said the December-quarter discussion in January should show the effect on receivable figures.
An analyst noted that export proceeds are expected within 181 days and questioned receivables outside the Quick Pay balance. Management did not provide a customer-level ageing schedule, but said October and early-November collections had already occurred and that it expected outstanding receivables to be closed in December. The change to an invoicing-based 30-to-45-day timeline sets a more defined payment mechanism for the identified export business.
Millworks also said it had become too exposed to Indian defense projects relative to other work. Management described domestic defense projects as difficult to press for fixed payment dates because their gestation periods can run for eight to 12 months and inspections require multiple approvals. Its stated response is to balance international exports and Indian defense work rather than concentrate collections in a single project type.
Can Millworks reduce future collection concentration?
Millworks said its plan is to balance domestic defense work with exports while increasing build-to-spec production. Management said build-to-spec work can provide margins about 3% to 5% above build-to-print work, although development can take three to six months or longer because it requires engineering, prototypes and customer approval. That product shift changes the work mix, but management did not say it guarantees faster payment.
Millworks has installed nine metal 3D printers and said they could shorten prototype delivery to four weeks from concept design, compared with more than three months in some earlier cases. It also expects an anodising plant at unit four to become operational in January 2027, following installation and trials. Management said it would seek National Aerospace and Defense Contractors Accreditation Program, or NADCAP, certification about six months after that installation.
Will Millworks make another investment in Quick Pay?
Millworks has not decided to make an additional investment in Quick Pay. Management said Quick Pay was working on larger Indian Army projects, but Millworks would consider whether to invest or provide support only after current receivables had been cleared. It described itself as already more exposed to the executed project, which includes the Rs 86.88 crore receivable and the roughly 8% equity stake.
Management’s recovery timetable is December, with a proposed exchange announcement once the amount is received. It also said a Rs 111 crore order would require six months for initial development and 12 to 14 months for full execution, showing that long production and approval cycles remain part of Millworks’ operating model. Collections, contract terms and project execution will therefore remain linked in assessing whether exposure is becoming less concentrated.
Conclusion
Millworks’ qualified audit opinion was discussed in connection with an Rs 86.88 crore Quick Pay receivable, delayed defense-project evidence and ageing beyond 180 days. Management said the underlying components and inventory had been inspected, while the delay stemmed from Indian Army validation and assembly-completion documentation. The recovery remains a management expectation, not a reported collection.
The next event to watch is Millworks’ stated December recovery and its January discussion of December-quarter receivables, when management expects changed export payment terms to be visible. Management also plans to start the unit-four anodising plant in January 2027, pursue a European aerospace-customer audit in February 2027, and consider any further Quick Pay support only after receivables are cleared.


