Sandur Manganese & Iron Ores secures 9.42 MTPA clearance
Key highlights
- Sandur Manganese & Iron Ores received environmental clearance on 11 November 2026 for 9.42 MTPA of iron ore RoM capacity.
- Iron ore RoM capacity can increase by 1.57 MTPA, or 20%, from 7.85 MTPA to 9.42 MTPA.
- Manganese ore RoM capacity is set to decline by 0.6070 MTPA from 1.34 MTPA to 0.7330 MTPA.
- The 1.2-kilometre downhill conveyor remains unchanged within the 1,860.10-hectare lease area.
powered by IRIS

The Sandur Manganese & Iron Ores Limited received environmental clearance on 11 November 2026 to increase iron ore run-of-mine capacity to 9.42 million tonnes per annum (MTPA) from 7.85 MTPA, a 20% rise, but it must obtain further regulatory approvals before operating at the enhanced level.
Know Sandur Manganese & Iron Ores inside out
Results, valuation, peers and who's buying, in one view.
What environmental clearance did Sandur Manganese & Iron Ores receive?
Sandur Manganese & Iron Ores received environmental clearance from the Ministry of Environment, Forest and Climate Change, Government of India, for its iron ore and manganese ore mine under Mining Lease No. 2678. The clearance covers a revised production configuration within the 1,860.10-hectare lease area.
The Ministry granted the clearance after examining the company's application under Paragraph 7(ii)(a) of the Environmental Impact Assessment Notification, 2006. The environmental clearance identification number is EC26A0000KA5280635N, dated 11 November 2026.
Sandur Manganese & Iron Ores disclosed the approval to the BSE Limited and National Stock Exchange of India Limited under Regulation 30 and Schedule III of the Securities and Exchange Board of India (Listing Obligations and Disclosure Requirements) Regulations, 2015. The 11 November 2026 filing identifies the approval as covering both iron ore and manganese ore production parameters at Mining Lease No. 2678.
How much can Sandur Manganese & Iron Ores increase iron ore capacity?
Sandur Manganese & Iron Ores has clearance to raise iron ore run-of-mine, or RoM, capacity by 1.57 MTPA to 9.42 MTPA from 7.85 MTPA. The 1.57 MTPA increase is 20% of the earlier 7.85 MTPA capacity.
The approved 9.42 MTPA capacity applies to the existing iron ore and manganese ore mine under Mining Lease No. 2678, not to a separate mine disclosed in the 11 November 2026 announcement. The filing describes the change as an enhancement of iron ore RoM capacity within the 1,860.10-hectare mining lease.
The same clearance changes the mine's manganese ore capacity in the opposite direction. Iron ore RoM capacity rises from 7.85 MTPA to 9.42 MTPA, while manganese ore RoM capacity declines from 1.34 MTPA to 0.7330 MTPA.
What happens to manganese ore and beneficiation capacity?
Sandur Manganese & Iron Ores has clearance to reduce manganese ore RoM capacity by 0.6070 MTPA to 0.7330 MTPA from 1.34 MTPA. The lower manganese ore capacity forms part of the same approved configuration that lifts iron ore RoM capacity by 1.57 MTPA to 9.42 MTPA.
The company said the revised iron ore, manganese ore and waste parameters are in accordance with the mining plan approved by the Indian Bureau of Mines. Its 11 November 2026 disclosure does not state why manganese ore capacity is being reduced or give production, sales or revenue forecasts for either commodity.
Sandur Manganese & Iron Ores will also reconfigure its beneficiation plant from one 7.00 MTPA unit to two 3.5 MTPA units. The stated aggregate beneficiation capacity remains 7.00 MTPA, because the two planned 3.5 MTPA units total 7.00 MTPA.
The shift from one 7.00 MTPA unit to two 3.5 MTPA units is a plant reconfiguration rather than a disclosed increase in aggregate plant capacity. The filing does not provide commissioning dates for the two 3.5 MTPA units, capital expenditure for the work, or a timetable for reaching the 9.42 MTPA iron ore level.
Got a follow-up? Ask IRIS
Can Sandur Manganese & Iron Ores operate at 9.42 MTPA now?
No, Sandur Manganese & Iron Ores said it will initiate further regulatory approvals before operating at the enhanced production levels. The environmental clearance dated 11 November 2026 therefore permits the revised configuration but does not state that 9.42 MTPA of iron ore capacity is already operating.
The filing does not identify the further approvals, the authorities involved, or expected decision dates. It also does not give an operating start date for the 1.57 MTPA iron ore capacity increase from 7.85 MTPA to 9.42 MTPA.
This distinction applies to the whole revised mine configuration. The clearance covers an increase in iron ore RoM capacity to 9.42 MTPA, a reduction in manganese ore RoM capacity to 0.7330 MTPA, and a beneficiation plant reconfiguration to two 3.5 MTPA units, while further approvals remain to be initiated.
What mine area and infrastructure does the clearance cover?
Sandur Manganese & Iron Ores' clearance applies within the 1,860.10-hectare area of Mining Lease No. 2678. The announcement does not disclose any change to the size of that 1,860.10-hectare lease as part of the 11 November 2026 approval.
The company said there will be no change to the already approved 1.2-kilometre downhill conveyor system. That means the filing retains the same 1.2-kilometre conveyor while allowing iron ore RoM capacity to increase from 7.85 MTPA to 9.42 MTPA.
The disclosed physical scope consists of the 1,860.10-hectare lease, the unchanged 1.2-kilometre downhill conveyor and the beneficiation plant's shift from one 7.00 MTPA unit to two 3.5 MTPA units. Sandur Manganese & Iron Ores did not disclose changes to other transport infrastructure or environmental clearance conditions in the announcement.
Conclusion
Sandur Manganese & Iron Ores has secured environmental clearance for a revised mining configuration that increases iron ore RoM capacity by 1.57 MTPA to 9.42 MTPA and reduces manganese ore RoM capacity by 0.6070 MTPA to 0.7330 MTPA. The approval also allows the 7.00 MTPA beneficiation arrangement to be reconfigured into two 3.5 MTPA units within Mining Lease No. 2678.
The next item to watch is the further regulatory approval process that Sandur Manganese & Iron Ores said it will initiate before operating at enhanced levels. The 11 November 2026 filing does not set a date for those approvals or for operation at 9.42 MTPA, and confirms that the 1.2-kilometre downhill conveyor will remain unchanged.


