Singer India Limited Begins Bhiwadi Output on November 23
Key highlights
- Singer India will begin commercial manufacturing at its Bhiwadi facility on November 23, 2026.
- The Bhiwadi plant has planned annual capacity of 13.08 lakh units.
- Singer India disclosed a first-phase investment of Rs. 11 crore for the facility.
- The Rajasthan State Pollution Control Board consent to operate is valid until September 30, 2031.
powered by IRIS

Singer India Limited will commence commercial manufacturing at its Bhiwadi, Rajasthan facility on November 23, 2026, with planned annual capacity of 13.08 lakh units and a first-phase investment of Rs. 11 crore. The filing marks the planned start of commercial operations at the company’s new manufacturing location.
Know Singer India inside out
Results, valuation, peers and who's buying, in one view.
When will Singer India begin Bhiwadi manufacturing?
Singer India will commence commercial manufacturing at its Bhiwadi facility from November 23, 2026, according to its November 21 filing. The disclosed date is significant because it provides a defined commercial start date for a facility that had previously been discussed in the context of pilot production and regulatory approvals.
The Bhiwadi plant is located in Rajasthan and is part of Singer India’s effort to increase domestic manufacturing. Earlier management communications had indicated that pilot production was expected from December 2026, subject to government and Bureau of Indian Standards, or BIS, approvals. The latest filing instead states that commercial manufacturing will begin from November 23.
This development moves the Bhiwadi project from the construction, approval and preparation stage toward operating activity. Singer India has not disclosed in the filing a product-wise production schedule, expected revenue contribution or the timing for reaching full planned capacity.
What capacity and investment does the filing disclose?
The filing states that the Bhiwadi facility has planned annual capacity of 13.08 lakh units and a first-phase investment of Rs. 11 crore. These figures provide the clearest current measure of the plant’s intended scale and the capital committed for its initial development.
The capacity figure is an annual planned level, rather than a statement of current production or sales. Therefore, it should not be treated as an immediate addition to output in the first quarter of operations. The filing also does not specify the utilisation level expected at launch or a timeframe to achieve the stated annual capacity.
Separately, Singer India had disclosed on November 19 that it received Consent to Operate from the Rajasthan State Pollution Control Board for the Bhiwadi plant. That consent is valid until September 30, 2031. The earlier disclosure cited Rs. 9.23 crore invested in land, building, plant, machinery and related assets, while the latest filing specifies a first-phase investment of Rs. 11 crore.
What will the Bhiwadi facility manufacture?
Singer India has indicated that the Bhiwadi facility will primarily manufacture Zig-Zag sewing machines at the initial stage. The company has also said the site could, in due course, assemble and manufacture industrial sewing machines and selected consumer appliances.
Zig-Zag machines are central to the facility’s near-term manufacturing purpose. Singer India has said it is India’s sole active BIS-licensed manufacturer of Zig-Zag machines. Management had previously outlined an objective to raise the share of Make-in-India Zig-Zag machines in relevant sales to about 50% during November 2026, then 70%, followed by close to 100% over the next two quarters, subject to execution and production ramp-up.
For industrial sewing machines, Singer India currently sells products rather than manufacturing them locally. Management has said domestic production of these machines would depend on policy conditions supporting local manufacturing and the associated cost advantages. The filing announcing the November 23 commercial start does not provide a launch date for locally made industrial sewing machines or appliances.
Got a follow-up? Ask IRIS
What approvals support the Bhiwadi start?
Singer India has received Consent to Operate from the Rajasthan State Pollution Control Board for the Bhiwadi plant, enabling manufacturing activity subject to the stipulated terms and conditions. The company disclosed that it received the consent on November 19, 2026, shortly before the announced commercial manufacturing date.
The operating consent covers the manufacturing facility at RIICO Industrial Area, Ghatal, Bhiwadi, in the Khairthal-Tijara district of Rajasthan. Its validity through September 30, 2031 gives the company a multi-year environmental operating clearance for the site.
Earlier discussions of pilot production had referred to government and BIS approvals as conditions for the proposed timetable. The latest filing’s commercial commencement date follows the disclosed environmental operating consent. Singer India has not provided further detail in the filing on any remaining product-specific approvals, if applicable, or on the manufacturing mix at the plant’s launch.
How does the Bhiwadi start matter for Singer India?
The start of commercial manufacturing adds a domestic production facility to Singer India’s operating network. For investors, the main disclosed metrics are the plant’s planned capacity of 13.08 lakh units annually and Rs. 11 crore first-phase investment, rather than an estimate of financial returns from the project.
The facility may support Singer India’s stated transition from imported sewing machines toward local production, particularly in Zig-Zag machines. But the financial effect will depend on production ramp-up, product mix, utilisation, demand and operating costs, none of which are quantified in the filing. The announcement therefore establishes an operational milestone without disclosing a revenue or profit outlook from Bhiwadi.
For customers and distribution channels, local manufacturing could support availability of products made at the Bhiwadi site as operations scale. The filing does not state changes to product pricing, dealer arrangements, employment, export plans or customer delivery schedules. Those details remain outside the announced information.
Conclusion
Singer India’s November 23 commercial manufacturing start at Bhiwadi is a defined operational step in its domestic production plan. The facility’s stated annual capacity of 13.08 lakh units and first-phase investment of Rs. 11 crore set out the scale of the project, while the initial focus on Zig-Zag machines aligns with the company’s established manufacturing capability.
The next points to watch are the plant’s production ramp-up, the share of locally made Zig-Zag machines in sales and any further disclosures on industrial sewing-machine or appliance manufacturing. Singer India has previously set targets of about 70% and then near-100% local Zig-Zag sales mix over the next two quarters, subject to execution and approvals.


