Alpex commences 2.2 GW G12R TOPCon cell production in Kosi
Key highlights
- Alpex says production has commenced at its 2.2 GW G12R TOPCon solar-cell facility in Kosi Kotwan.
- Alpex inaugurated the 9 lakh-square-foot Kosi facility on September 16, 2026.
- Alpex states its G12R TOPCon cell technology can reach efficiency of up to 26.5%.
- Alpex reports 2.4 GW of module capacity and targets first-phase wafer and ingot production by June 2028.
powered by IRIS

Alpex Solar Limited says production has commenced at its 2.2 GW G12R TOPCon solar-cell facility in Kosi Kotwan following installation, commissioning and trial production. The 9 lakh-square-foot Mathura facility was inaugurated on September 16, 2026, and adds solar-cell manufacturing alongside Alpex’s 2.4 GW solar-module capacity.
Know Alpex Solar inside out
Results, valuation, peers and who's buying, in one view.
Has Alpex started production at its Kosi cell plant?
Yes, Alpex says production has commenced at the 2.2 GW G12R TOPCon, or third-generation, solar-cell facility after installation, commissioning and trial production led by experienced foreign technicians. The presentation identifies the site as Unit II in Kosi Kotwan, Mathura, Uttar Pradesh, and says the greenfield facility was inaugurated in September 2026.
The presentation contains different descriptions of the start-up stage across its pages. Its detailed facility page says production has commenced, while its broader value-chain overview says solar-cell production is “commencing soon.” The detailed disclosure provides the company’s clearest reported position, but Alpex does not disclose commercial output, capacity utilisation, production yield, cell sales or revenue from the 2.2 GW line.
The Kosi site is part of a seven-unit industrial footprint rather than a stand-alone production location. Unit III at Kosi is an administrative block and warehousing site, Unit IV is reserved for future expansion, and Unit VII has 12,000 metric tonnes of aluminium-frame capacity. Alpex says six of its seven units will be functional by FY 2027.
What technology and scale does Alpex’s Kosi plant have?
Alpex’s Kosi facility has 2.2 GW of G12R TOPCon cell capacity, covers 9 lakh square feet and has a stated cell efficiency of up to 26.5%. The company describes it as Uttar Pradesh’s first-of-its-kind G12R TOPCon third-generation solar-cell manufacturing facility.
The line is designed for fully automated operations supported by automated guided vehicles, or AGVs, and an advanced LECO laser system. Alpex says its core engineering team received advanced solar-cell manufacturing training in Taiwan and China, while foreign technicians led installation, commissioning and trial production at Kosi.
Alpex says the equipment was supplied as a turnkey solution by a global partner with more than 100 GW of successful installations in progress. It also says the same tools and configuration have achieved higher key performance indicators in a multi-GW project, but it does not report Kosi-specific efficiency, yield, defect rate or throughput. The stated 26.5% is therefore a maximum technology specification, not a disclosed factory operating result.
Got a follow-up? Ask IRIS
How does the new cell line compare with Alpex’s module base?
The 2.2 GW cell line is 0.2 GW below Alpex’s reported 2.4 GW solar-module capacity, placing in-house cell capacity close to its module-manufacturing base. Alpex operates two 1.2 GW module facilities: Unit I at Kasna, Greater Noida, and Unit V at Ecotech, Greater Noida.
Alpex doubled module capacity from 1.2 GW in FY 2024-25 to 2.4 GW in FY 2025-26 before reporting the cell-facility start-up in FY 2026-27. Management presents the cell investment as a foundation for backward integration and margin expansion through improved cost control and supply-chain efficiency. Those are stated strategic aims, not financial outcomes quantified in the November 2026 presentation.
The cell line supplies an upstream manufacturing segment for Alpex’s stated module portfolio, which includes G12R TOPCon, bifacial and Mono PERC modules rated from 265 watts to 640 watts. Alpex identifies solar modules as its core revenue driver, while its broader platform also includes 2 to 10 horsepower solar pumps, engineering, procurement and construction services, independent power production and aluminium-frame manufacturing.
What is Alpex’s next manufacturing plan after cell production?
Alpex plans to commence first-phase ingot and wafer production by June 2028 and targets 5 GW each of solar-glass capacity and wafer-and-ingot capacity by FY 2030. The company links the planned ingot and wafer start to anticipated ALMM III requirements, while describing its cell capacity as aligned with the ALMM II timeline.
The company maps its policy roadmap as solar modules under ALMM I in 2024, solar cells under ALMM II in 2026, and wafers and ingots under ALMM III in 2028. Alpex says eligibility under ALMM List II strengthens access to India’s domestic solar market, which is the stated policy rationale for adding G12R TOPCon cell capacity.
The projects have different reported stages. The Kosi cell facility is described as having commenced production after commissioning and trial production, whereas Unit IV in Kosi and Unit VI in Narmadapuram are designated for future expansion. Alpex provides no project cost, financing source, construction timetable or operating-capacity schedule for the solar-glass, wafer and ingot targets.
Conclusion
Alpex’s reported commencement of production at Kosi marks its entry into solar-cell manufacturing, adding 2.2 GW of G12R TOPCon capacity to a 2.4 GW module base. The company positions the facility as an integration step intended to improve supply control and cost efficiency, while its stated 26.5% maximum efficiency and 9 lakh-square-foot scale describe the new line’s technology and footprint.
What to watch next is disclosure on the Kosi production ramp, including output, utilisation, yield and cell sales, which the November 2026 presentation does not provide. Alpex has also set a June 2028 target for first-phase wafer and ingot production and FY 2030 targets of 5 GW each for solar glass and wafers and ingots.


