Amtech Esters Starts Asoda, Lifts Resin Capacity 2.6 Times
Key highlights
- Amtech began commercial production at Asoda in November 2026 after October 2026 trial runs.
- Asoda adds 4,800 MTPA of UPR capacity, lifting Amtech’s total to 7,760 MTPA from 2,960 MTPA.
- UPR utilisation reached 88.1% in FY26, up from 50.4% in FY24.
- Amtech forecasts revenue of more than Rs 100 crore in FY28E versus Rs 40.7 crore in FY26.
powered by IRIS

Amtech Esters began commercial production at its Asoda facility in November 2026, increasing unsaturated polyester resin capacity 2.6 times to 7,760 metric tonnes per annum (MTPA) from 2,960 MTPA. The expansion followed resin utilisation of 88.1% in financial year 2026 (FY26) and added 4,800 MTPA through a plant equipped with two reactors, a boiler and five tanks.
Know Amtech Esters inside out
Results, valuation, peers and who's buying, in one view.
When did Amtech begin commercial production at Asoda?
Amtech began commercial production at Asoda in November 2026, after trial runs in October 2026. The project timeline states that the site was agreed in October 2023, creating a three-year path from site agreement to commercial operations. The presentation identifies FY28E as the facility’s first full financial year of operation.
The November start followed Rs 27.5 crore of revenue from operations in the first half of FY27 (H1 FY27), up 45.7% from Rs 18.9 crore in H1 FY26. H1 FY27 revenue represented 67.5% of FY26 revenue of Rs 40.7 crore, although Asoda began commercial production after the reported first half. Management’s presentation links the new plant to a faster expected pace of growth in subsequent quarters.
Asoda includes two resin reactors, a boiler platform and five tanks within an 80,000-square-foot facility. The presentation says modern methods reduce manual work previously required and that direct tankers replace drums for resin supply. It also identifies in-house testing, a quality-control laboratory, marked walkways, steel platforms, a pump house and a control panel at the plant.
How much resin capacity has Amtech added at Asoda?
Amtech has added 4,800 MTPA of unsaturated polyester resin, or UPR, capacity at Asoda, taking total UPR capacity to 7,760 MTPA from 2,960 MTPA at Bahadurgarh. The new capacity is 1.6 times Bahadurgarh’s capacity, while the combined base is 2.6 times the previous total.
The increase follows a rise in utilisation at the existing resin operation. UPR utilisation increased from 50.4% in FY24 to 75.4% in FY25 and 88.1% in FY26, a 37.7-percentage-point increase over two years. Pigment utilisation also rose, from 53.4% in FY24 to 74.6% in FY25 and 83.4% in FY26, meaning both manufacturing lines operated at higher levels before Asoda’s launch.
How is Amtech funding the Asoda capacity expansion?
Amtech states that Asoda involves no new debt and is supported by internal accruals. The presentation does not disclose a separate rupee cost for the Asoda project, so it does not establish how much of the facility’s 4,800 MTPA capacity was funded by any individual source.
The project timeline separately records Rs 81 crore of initial public offering, or IPO, funds in September 2026. The presentation identifies a pigment operation making pastes, cobalt accelerators and hardeners, but does not state that the Rs 81 crore was allocated to Asoda. The stated structure should therefore be read as no new debt for Asoda alongside a separate disclosed IPO-fund event.
The expansion forms part of a manufacturing plan spanning resin and pigments. UPR accounted for 62.8% of FY26 revenue, while pigments and colourants contributed 24.1% and fibre-reinforced plastic, or FRP, inputs contributed 13.0%. Amtech’s stated priorities include filling Asoda capacity, adding fabricator and original equipment manufacturer accounts, and adding triple-roll mills in the pigment operation towards a 973 MTPA pigment-capacity target.
Got a follow-up? Ask IRIS
What revenue growth does Amtech expect from Asoda?
Amtech’s presentation forecasts revenue from operations of more than Rs 100 crore in FY28E, compared with Rs 40.7 crore in FY26, with Asoda expected to contribute Rs 39.1 crore of the bridge. The company presents this as capacity-led growth from Asoda and expanded pigment capacity, rather than reported revenue.
The forecast sequence is Rs 70 crore or more in FY27E and Rs 100 crore or more in FY28E, after Rs 36.9 crore in FY25 and Rs 40.7 crore in FY26. Management presents a roughly 57% compound annual growth rate from FY26 to FY28E. That outlook depends on the ramp-up of Asoda from November 2026, higher pigment capacity and sales beyond the company’s historical geographic concentration.
Amtech reported H1 FY27 earnings before interest, tax, depreciation and amortisation, or EBITDA, of Rs 3.9 crore, up 51% from Rs 2.6 crore in H1 FY26, with a 14.3% margin. Profit after minority interest, described as PAT in the presentation, was Rs 2.3 crore, up 78% from Rs 1.3 crore, while PAT margin rose to 8.5% from 6.9%. These first-half figures predate the November 2026 commercial start at Asoda.
Which markets and products will Amtech target with the new capacity?
Amtech plans to fill Asoda by adding fabricator and original equipment manufacturer accounts, while expanding beyond its Delhi, Uttar Pradesh and Haryana core, which generated 86% of FY26 revenue. The company also says it is gaining visibility among quartz-sector buyers, though the presentation provides no sales figure for that customer segment.
The UPR portfolio contains 49 grades used in buttons, automotive, switchgear, casting and lamination applications. The broader basket contains 79 products, including 30 FRP-input stock-keeping units such as curing agents, fibreglass, epoxy and silicone. Amtech presents the combined resin, colour and cure offering as a route to cross-selling, with captive pigments matched to its resins.
The industry context in the presentation projects India’s UPR market to rise from US$1.02 billion in 2025 to US$2.01 billion in 2034E, a 7.5% compound annual growth rate. Indian UPR output rose from 12.9 thousand metric tonnes in FY21 to 22.4 thousand metric tonnes in FY25, while cited capacity was 34.0 thousand metric tonnes. Construction and infrastructure, automotive and electric vehicles, electrical uses, FRP fabrication, marine products, buttons and décor are listed as demand drivers.
Conclusion
Amtech’s November 2026 commissioning of Asoda changes its resin production base from 2,960 MTPA to 7,760 MTPA after legacy UPR utilisation reached 88.1% in FY26. The plant’s 4,800 MTPA addition is the largest identified component of management’s bridge from Rs 40.7 crore of FY26 revenue to more than Rs 100 crore in FY28E.
The next measure is the facility’s ramp through FY28E, its first full year, and management’s progress in adding fabricator and original equipment manufacturer accounts. Investors can also watch the stated Rs 70 crore or more FY27E revenue objective, the 973 MTPA pigment-capacity target, and efforts to reduce the 86% FY26 revenue concentration in Delhi, Uttar Pradesh and Haryana.


