Classic Electrodes cuts FY27 outlook after rail-clip delay
Key highlights
- Classic Electrodes reduced FY27 revenue guidance to ₹280 crore to ₹290 crore from ₹330 crore to ₹350 crore.
- H1 FY27 total income rose about 18% to ₹145.23 crore from ₹123.03 crore in H1 FY26.
- The pending rail-clip approval deferred an expected FY27 contribution of ₹45 crore to ₹50 crore.
- Classic Electrodes reported H1 FY27 EBITDA of ₹13.94 crore and net profit of ₹7.28 crore.
powered by IRIS

Classic Electrodes (India) Limited has reduced its FY27 revenue expectation to ₹280 crore to ₹290 crore because delayed approval for elastic rail clips has deferred an expected ₹45 crore to ₹50 crore contribution. Management said its earlier FY27 target of ₹330 crore to ₹350 crore is now difficult to achieve, despite H1 FY27 total income rising 18% to ₹145.23 crore.
Know Classic Electrodes (India) inside out
Results, valuation, peers and who's buying, in one view.
Why did Classic Electrodes cut its FY27 revenue expectation?
Classic Electrodes cut its FY27 expectation because commercial production of elastic rail clips cannot begin before clearance from the Research Designs and Standards Organisation, or RDSO. Management said the rail-clip facility and machinery are ready, but the company had completed only two of four approval processes and was awaiting the third stage, followed by RDSO inspection and final approval.
Management had included ₹45 crore to ₹50 crore of elastic rail clip revenue in the previous ₹330 crore to ₹350 crore FY27 target. It said that target would be difficult to achieve because of the delay in the elastic rail clip, or ERC, approval. If clearance allows three months of production, management estimated revenue from the line at ₹10 crore to ₹12 crore in FY27.
The revised ₹280 crore to ₹290 crore range is therefore principally based on the welding-consumables business. Management said FY27 margins should remain broadly stable or show a slight increase without rail-clip revenue, although it had expected the ERC business to add to margins once commercial production began.
How did Classic Electrodes perform in H1 FY27?
Classic Electrodes reported H1 FY27 total income of ₹145.23 crore, up about 18% from ₹123.03 crore in H1 FY26. Earnings before interest, tax, depreciation and amortisation, or EBITDA, increased nearly 17% to ₹13.94 crore, while net profit rose about 12% to ₹7.28 crore from ₹6.49 crore a year earlier.
EBITDA margin remained about 9.6% in H1 FY27. Management attributed the slower increase in net profit relative to total income partly to higher depreciation and amortisation, which it said rose to ₹2.4849 crore from ₹1.1911 crore in H1 FY26 after investments and upgrades.
Management described customer demand as steady during the first half, though it said the first quarter was slightly weak because of war-related disruption. It expects better demand in the second half from existing customers and potential buyers of flux-cored wire. Railway purchase orders outstanding were about ₹25 crore, while dealer-network requirements were estimated at ₹30 crore to ₹35 crore, covering two to three months.
What is supporting Classic Electrodes' welding-consumables growth?
Classic Electrodes said welding consumables remain its primary growth driver, covering welding electrodes, metal inert gas, or MIG, wires and flux-cored wire. Management expects the core welding business to grow by about 25% to 30%, while the rail-clip line is intended to add a second revenue stream after approval.
A flux-cored wire line started in the late third quarter of the previous financial year, and management said its sales are contributing in FY27. Technology upgrades also increased MIG-wire production. Management put installed capacity utilisation at the facility discussed on the call at about 75% to 78%, leaving room for a further increase in H2 FY27.
Manufactured goods accounted for more than 70% of H1 revenue, compared with about 29% from trading. Management said trading gross margin is typically 4% to 5%, while average manufacturing gross margin is above 15%. It described trading as opportunity-based rather than a principal business focus.
The Jhajjar unit has annual production capacity of 3,600 metric tonnes and was operating at about 67% to 68% utilisation, according to management. The company expects the unit to contribute ₹28 crore to ₹30 crore to FY27 revenue, or about 10% of the revised top-line range, compared with around ₹12 crore of H1 FY27 sales cited by an analyst on the call.
Got a follow-up? Ask IRIS
When can Classic Electrodes begin elastic rail clip production?
Classic Electrodes can begin elastic rail clip production immediately after RDSO clearance because the plant installation is complete, management said. It estimated approval could arrive by the end of December or the first week of January, but stressed that this was an estimate based on discussions with RDSO and not a written confirmation.
The elastic rail clip product is sold only to the railway department, making approval timing central to FY27 revenue and to the future revenue mix. Management described the product as allied to its existing business because the company already supplies railways and works with iron and steel materials. It also cited the management group's experience in manufacturing, cables and conductors.
Management said elastic rail clips could account for about 15% to 20% of overall revenue once the business begins contributing. For FY28, it said a full financial year of rail-clip production, combined with 25% to 30% growth in welding consumables, could allow revenue to reach ₹400 crore if its plans are implemented.
What expansion and funding plans has Classic Electrodes disclosed?
Classic Electrodes is still assessing land for a manufacturing facility in southern or western India, considering industrial policies, logistics and customer demand. Management's preliminary plan is for 500 metric tonnes of monthly capacity, or 6,000 metric tonnes annually, requiring capital expenditure of ₹50 crore to ₹55 crore.
Management said financial assistance beyond promoter contributions may be required if land is acquired and the proposed plant proceeds. It also disclosed a ₹15 crore corporate guarantee for debt raised by group entity All-Time Suppliers. Management expects that debt to be repaid and the guarantee released within the next two years.
At its existing operations, management said welding-consumables capacity could support revenue of up to ₹450 crore. It expects flux-cored wire utilisation to reach 80% to 90% in FY28 and electrode utilisation to rise from about 86% in FY26 to as much as 95% through efficiency improvements. These are management expectations rather than reported outcomes.
Conclusion
The FY27 revision to ₹280 crore to ₹290 crore reflects the delayed launch of a new railway-facing product rather than a reported decline in the established welding business. H1 FY27 total income increased 18% to ₹145.23 crore, but the deferred ₹45 crore to ₹50 crore rail-clip contribution has made the earlier ₹330 crore to ₹350 crore target unattainable, according to management.
The next event to watch is RDSO's completion of the remaining approval stages, which management estimated could occur by late December or early January. Management's FY28 revenue ambition of ₹400 crore depends on a full year of elastic rail clip operations and planned 25% to 30% welding-business growth, while the proposed ₹50 crore to ₹55 crore new facility remains subject to land selection and funding decisions.


