GLEN Plans 21,095 MT Food-Container Capacity and Paper Cups
Key highlights
- GLEN plans to add 13,109 MT of Food Containers capacity, taking annual capacity to 21,095 MT in FY26.
- GLEN plans to establish 7,696 MT of annual Paper Cups capacity, with no existing capacity shown.
- Thin Wall Food Containers operated at 77.74% utilization in FY26, versus 28.33% for PLA Straws.
- Thin Wall Containers revenue increased to Rs 168.0268 crore in FY26 from Rs 125.4889 crore in FY25.
powered by IRIS

GLEN plans to raise annual food-container capacity to 21,095 metric tonnes (MT) in FY26 from 7,986 MT, adding 13,109 MT, and to establish 7,696 MT of annual paper-cup capacity. The plan follows FY26 utilization of 77.74% for Thin Wall Food Containers, compared with 28.33% for PLA Straws and 34.13% for Paper Straws.
Know GLEN Industries inside out
Results, valuation, peers and who's buying, in one view.
What capacity expansion is GLEN planning for FY26?
GLEN is planning to add 13,109 MT of annual Food Containers capacity in FY26, taking total capacity from 7,986 MT to 21,095 MT. The presentation identifies plastic food containers made through injection and thermoforming as the expansion areas. Its capacity plan uses the label Food Containers, while the manufacturing overview identifies the current operation as Thin Wall Food Containers.
GLEN also plans to enter Paper Cups with 7,696 MT of annual capacity in FY26. The plan shows no existing Paper Cups capacity, while the proposed 7,696 MT is entirely listed as planned capacity. No additional capacity is listed for Paper Straw, which remains at 1,134 MT, or PLA Straw, which remains at 1,928 MT.
GLEN reports that its manufacturing facility is at PPF-16, Poly Park, Dhulagarh, Howrah-711302, on 4,000 square metres of land with 90,000 square feet of built-up area. The presentation does not disclose the project cost, commissioning timetable, funding source, customer commitments, or the allocation of the 13,109 MT Food Containers addition between injection and thermoforming.
How much will GLEN's food-container capacity increase?
GLEN's planned Food Containers capacity will increase by 13,109 MT annually, from the present 7,986 MT to 21,095 MT. The planned total is more than twice the existing installed capacity, while both existing straw categories have no capacity increase listed in the FY26 plan.
The 21,095 MT planned Food Containers total exceeds the 11,048 MT of current installed capacity across Thin Wall Food Containers, PLA Straws and Paper Straws combined. That current base comprises 7,986 MT of Thin Wall Food Containers, 1,928 MT of PLA Straws and 1,134 MT of Paper Straws. The FY26 plan therefore directs added capacity to containers and a new cups category rather than to either existing straw line.
Got a follow-up? Ask IRIS
Why is GLEN expanding containers and adding paper cups?
GLEN's FY26 operating data show that Thin Wall Food Containers had the highest utilization among the three disclosed manufacturing categories. The category produced 6,209 MT from 7,986 MT of installed capacity, resulting in 77.74% utilization. PLA Straws produced 525 MT from 1,928 MT, or 28.33%, while Paper Straws produced 387 MT from 1,134 MT, or 34.13%.
Thin Wall Food Containers also increased production and utilization from FY25 to FY26 while installed capacity remained unchanged at 7,986 MT. Production increased by 142 MT, from 6,067 MT in FY25 to 6,209 MT in FY26, and utilization rose from 75.97% to 77.74%. PLA Straw production declined from 674 MT to 525 MT over the same period, reducing utilization from 34.94% to 28.33%.
Paper Straw utilization increased from 26.13% in FY25 to 34.13% in FY26 as production rose from 296 MT to 387 MT, but it remained below the container rate. GLEN describes PLA Straws as being made from renewable materials including corn starch and sugarcane, while Paper Straws are described as food-grade, Forest Stewardship Council-certified paper products compliant with United States Food and Drug Administration standards. The presentation gives no production, utilization or revenue target for the planned 7,696 MT Paper Cups line.
What does GLEN's revenue mix show about the capacity plan?
GLEN reported FY26 revenue of Rs 168.0268 crore from Thin Wall Containers, compared with Rs 125.4889 crore in FY25 and Rs 110.1254 crore in FY24. The FY25-to-FY26 increase was Rs 42.5379 crore. This revenue progression occurred alongside FY26 production of 6,209 MT and 77.74% utilization for Thin Wall Food Containers.
PLA Straws recorded FY26 revenue of Rs 23.8945 crore, down from Rs 34.505 crore in FY25 but below neither the FY24 comparison of Rs 28.1571 crore nor the FY25 utilization rate of 34.94%. Paper Straws generated Rs 10.9712 crore in FY26, up from Rs 9.6877 crore in FY25 and Rs 5.275 crore in FY24. Despite the Paper Straw revenue increase, its FY26 utilization was 34.13%, against 77.74% for Thin Wall Food Containers.
GLEN's total FY26 revenue was Rs 203.1261 crore, comprising Rs 147.5323 crore of domestic revenue and Rs 55.5938 crore of export revenue. Domestic revenue increased from Rs 113.5203 crore in FY25, while export revenue declined from Rs 57.1406 crore. Domestic revenue represented 72.63% of FY26 total revenue, up from 66.52% in FY25, although the presentation does not state the intended market split for the added Food Containers and Paper Cups output.
Conclusion
GLEN's FY26 plan would add 13,109 MT of Food Containers capacity, taking the total to 21,095 MT, and create a 7,696 MT Paper Cups line. The proposed allocation differs from the existing straw operations, where FY26 utilization was 28.33% for PLA Straws and 34.13% for Paper Straws, versus 77.74% for Thin Wall Food Containers.
The next disclosures to watch are the timing, capital requirement and funding for the FY26 additions, along with the production ramp after capacity is installed. GLEN has not disclosed a Paper Cups utilization target, a sales target for the 21,095 MT Food Containers capacity, or expansion plans for the 1,928 MT PLA Straw and 1,134 MT Paper Straw lines.


