Nupur Recyclers: Frank Metals Profit Offsets Subsidiary Losses
Key highlights
- Frank Metals Recyclers reported Q2 FY27 profit after tax of Rs 5.69 crore on revenue of Rs 67 crore.
- Nupur Extrusion reported a Q2 FY27 loss after tax of Rs 1.30 crore on revenue of Rs 13.48 crore.
- Tycod Autotech generated Q2 FY27 EBITDA of Rs 1.03 crore but reported a Rs 42 lakh loss after tax.
- Nupur Extrusion’s subsidiary profile shows about 50% utilisation against total capacity of about 4,800 MTPA.
powered by IRIS

Nupur Recyclers Limited reported sharply different subsidiary outcomes in Q2 FY27: Frank Metals Recyclers earned Rs 5.69 crore in profit after tax on Rs 67 crore of revenue, while Nupur Extrusion recorded a Rs 1.30 crore loss after tax on Rs 13.48 crore of revenue. The disclosures show that profitability differed markedly across the group’s downstream operations.
Know Nupur Recyclers inside out
Results, valuation, peers and who's buying, in one view.
Which Nupur Recyclers subsidiary made the largest Q2 profit?
Frank Metals Recyclers made the largest disclosed subsidiary profit in Q2 FY27, reporting Rs 5.69 crore of profit after tax, Rs 8.47 crore of earnings before interest, tax, depreciation and amortisation (EBITDA), and Rs 67 crore of revenue. Nupur Recyclers owns 80% of Frank Metals Recyclers, which converts zinc and aluminium scrap into alloys, ingots, billets and extrusion profiles.
Frank Metals Recyclers reported a 12.6% EBITDA margin and an 8.5% profit-after-tax margin in Q2 FY27. Its Faridabad, Haryana facility has total capacity of about 18,000 metric tonnes per annum (MTPA), installed capacity of about 12,000 MTPA and utilisation of about 67%, according to its subsidiary profile. The business produces Zamak zinc alloys, ADC12 and ADC6 aluminium alloys, aluminium billets, and extrusion profiles.
Management said the new 4-inch extrusion plant at Frank Metals Recyclers supported Nupur Recyclers’ Q2 FY27 growth, and the quarterly highlights described the subsidiary’s extrusion capacity as fully utilised. However, those same highlights list Frank Metals Recyclers revenue at Rs 64.23 crore, compared with Rs 67 crore in the detailed Q2 subsidiary table. The presentation does not explain the Rs 2.77 crore difference.
For H1 FY27, Frank Metals Recyclers reported revenue of Rs 116.19 crore, EBITDA of Rs 13.56 crore and profit after tax of Rs 9.17 crore. Its H1 EBITDA margin was 11.7%, compared with 12.6% reported for Q2 FY27, while its H1 profit-after-tax margin was 7.9%, compared with 8.5% in Q2. These reported period figures show higher stated margins in the second quarter than in the first half overall.
Why did Nupur Extrusion report a Q2 loss?
Nupur Extrusion reported a Rs 1.30 crore loss after tax and negative EBITDA of Rs 39 lakh in Q2 FY27, despite generating Rs 13.48 crore of revenue. The 70%-owned subsidiary makes aluminium extrusion profiles for solar, original equipment manufacturer (OEM), construction and industrial customers, and its profile reports utilisation of about 50%.
The Sampla, Haryana operation has total capacity of about 4,800 MTPA and installed capacity of about 2,400 MTPA, according to the subsidiary profile. Its product range includes aluminium profiles for MyOne shuttering, solar mounting structures, and door and window frames. Nupur Extrusion’s Q2 loss was therefore reported while about half of its disclosed installed capacity was utilised.
Nupur Extrusion reported Rs 23.23 crore of revenue, negative EBITDA of Rs 15 lakh and a Rs 1.90 crore loss after tax for H1 FY27. The Q2 loss after tax of Rs 1.30 crore accounted for a substantial part of the six-month loss, while Q2 negative EBITDA of Rs 39 lakh was greater than the negative EBITDA disclosed for H1. Nupur Recyclers does not provide a quarterly-to-half-year EBITDA reconciliation in the presentation.
Management said Nupur Extrusion will add about 150 metric tonnes per month of aluminium extrusion capacity to its existing capacity of about 200 metric tonnes per month. The presentation identifies improved utilisation and incremental output from new capacity as two growth levers, but it does not provide a target utilisation rate, expected revenue contribution or profitability timetable for the added extrusion capacity.
Got a follow-up? Ask IRIS
How did Tycod Autotech compare with the other subsidiaries?
Tycod Autotech reported positive Q2 FY27 EBITDA of Rs 1.03 crore on revenue of Rs 15.83 crore, but posted a Rs 42 lakh loss after tax. Its 6.5% EBITDA margin was below Frank Metals Recyclers’ 12.6%, while its loss after tax placed it between Frank Metals Recyclers’ profit and Nupur Extrusion’s Rs 1.30 crore loss.
Nupur Recyclers owns 51% of Tycod Autotech, a Pantnagar, Uttarakhand manufacturer of die-cast and machined automotive components. The presentation says the business was acquired in September 2025 for an enterprise value of about Rs 24 crore. Its subsidiary profile lists total and installed capacity at about 4,800 MTPA, and says it makes 43 single-vendor parts for Tata Motors’ commercial vehicle range.
Tycod Autotech’s H1 FY27 figures differ from its Q2 outcome: it reported Rs 28.34 crore of revenue, Rs 3.15 crore of EBITDA and Rs 10 lakh of profit after tax for the six-month period. The H1 EBITDA margin was 11.1% and the profit-after-tax margin was 0.3%. Management attributed Q2 FY27 group momentum partly to new orders from Sundram and Tata.
The presentation gives two different utilisation indicators for Tycod Autotech. Its Q2 operational highlights say utilisation rose to about 30% from about 10% in Q1, whereas the dedicated subsidiary profile shows about 100% utilisation against 4,800 MTPA of installed capacity. Nupur Recyclers does not define the measures or reconcile the reported utilisation figures.
What do the results show about Nupur Recyclers’ downstream mix?
Nupur Recyclers’ Q2 FY27 disclosures show that Frank Metals Recyclers was the only subsidiary with a substantial reported profit after tax, while Tycod Autotech and Nupur Extrusion together recorded losses after tax of Rs 1.72 crore. Frank Metals Recyclers’ Rs 5.69 crore profit exceeded the Rs 42 lakh loss at Tycod Autotech and the Rs 1.30 crore loss at Nupur Extrusion.
The subsidiaries perform different roles in Nupur Recyclers’ materials chain. The parent supplies about 50% to 60% of imported scrap to subsidiaries and sells about 40% to 50% in the open market. Frank Metals Recyclers processes scrap into alloys and billets, Tycod Autotech uses alloys for automotive components, and Nupur Extrusion uses aluminium billets for profiles sold into solar, construction and industrial applications.
Capacity and utilisation data also vary across the three businesses. Frank Metals Recyclers has about 18,000 MTPA of total capacity at about 67% utilisation, while Nupur Extrusion has about 4,800 MTPA of total capacity and about 50% utilisation. Nupur Recyclers reports group capacity of about 31,200 MTPA, with about 22,800 MTPA utilised, equivalent to an overall utilisation rate of about 73%.
Conclusion
The Q2 FY27 subsidiary disclosures point to an uneven downstream earnings profile at Nupur Recyclers. Frank Metals Recyclers reported Rs 67 crore of revenue and Rs 5.69 crore of profit after tax, whereas Nupur Extrusion generated Rs 13.48 crore of revenue but recorded a Rs 1.30 crore loss. Tycod Autotech produced positive EBITDA but remained loss-making after tax during the quarter.
The next disclosed milestones are expected in Q4 FY27. Management says Frank Metals Recyclers is installing an additional aluminium extrusion plant with capacity of about 3,600 MTPA, while Nupur Extrusion is adding about 150 metric tonnes per month of capacity. Nupur Recyclers also expects to commission its 6,000 MTPA lithium iron phosphate battery-recycling facility at Sampla in Q4 FY27, funded through internal accruals.


