Ddev Plastiks capacity reaches 316,400 MTPA, utilisation at 63%
Key highlights
- Ddev Plastiks reported 316,400 MTPA of installed capacity as of September 2026.
- Ddev Plastiks' total utilisation was 63% in Q2FY27, versus 77% in Q4FY26.
- The April 2026 XLPE commissioning added 48,000 MTPA and involved Rs 79.22 crore of capital expenditure.
- Ddev Plastiks reported 64% group utilisation in H1FY27 and production volume of 101,833 MT.
powered by IRIS

Ddev Plastiks reached installed capacity of 316,400 metric tonnes per annum (MTPA) in Q1FY27 after commissioning a 48,000-MTPA cross-linked polyethylene (XLPE) facility, while total utilisation was 63% in Q2FY27, compared with 77% in Q4FY26 before the April 2026 XLPE commissioning.
Know DDev Plastiks Industries inside out
Results, valuation, peers and who's buying, in one view.
How did Ddev Plastiks reach 316,400 MTPA of capacity?
Ddev Plastiks reached 316,400 MTPA through completed additions in polyvinyl chloride (PVC), halogen-free flame-retardant (HFFR) and XLPE compounds. PVC capacity rose by 25,000 MTPA to 69,000 MTPA in FY26, HFFR capacity doubled by 5,000 MTPA to 10,000 MTPA, and XLPE capacity increased by 48,000 MTPA to 214,500 MTPA in Q1FY27.
The largest addition was the greenfield XLPE unit at Bhiwadi, Rajasthan, which became operational in April 2026. Ddev Plastiks reported capital expenditure of Rs 79.22 crore for that XLPE addition and said the new facility is expected to generate additional revenue of around Rs 500 crore. This revenue outcome is management's expectation rather than a reported result.
Ddev Plastiks' September 2026 plant-level capacity schedule identifies 92,600 MTPA of Sioplas at Surangi, 58,000 MTPA of PVC cable compounds at Silvassa Plant 1 and 35,000 MTPA of peroxide at Surangi among its larger production lines. The company reports six manufacturing plants in Rajasthan, West Bengal, Daman and Diu, and Dadra and Nagar Haveli.
Why did Ddev Plastiks utilisation fall to 63% in Q2FY27?
Ddev Plastiks' total utilisation was 63% in Q2FY27 after total installed capacity increased to 316,400 MTPA. This was 14 percentage points below 77% in Q4FY26, when total installed capacity was 268,400 MTPA, and 18 percentage points below 81% in Q2FY26, when capacity was 238,400 MTPA.
The largest decline was in Sioplas, XLPE and semiconducting compounds, where utilisation moved from 89% in Q4FY26 to 64% in Q2FY27. Capacity in that group increased from 166,500 MTPA to 214,500 MTPA in Q1FY27 following commissioning of the Rajasthan facility, adding 48,000 MTPA to the annual base.
For H1FY27, Ddev Plastiks reported 64% group utilisation on the 316,400-MTPA capacity base and production volume of 101,833 MT. The company separately reported 63% utilisation for Q2FY27, while XLPE accounted for 71% of H1FY27 production volume.
Which Ddev Plastiks businesses have the most unused capacity?
Ddev Plastiks has its largest installed base in Sioplas, XLPE and semiconducting compounds, which operated at 67% in H1FY27 against 214,500 MTPA of capacity. That compared with 87% utilisation in FY26 on 166,500 MTPA, before the April 2026 addition of 48,000 MTPA.
PVC compounds ran at 55% in H1FY27, up from 49% in FY26 despite capacity increasing from 44,000 MTPA to 69,000 MTPA. HFFR operated at 46% on 10,000 MTPA, compared with 49% in FY26, while engineering products operated at 18% on 2,400 MTPA, down from 40% in FY26.
Antifab recorded the highest H1FY27 utilisation among the listed categories at 77% on 20,500 MTPA, although this was below 82% in FY26. Ddev Plastiks had reduced Antifab capacity from 36,000 MTPA in FY22 to 20,500 MTPA by FY24, while total installed capacity grew from 268,400 MTPA in FY26 to 316,400 MTPA in H1FY27.
Got a follow-up? Ask IRIS
What demand does Ddev Plastiks expect the added capacity to serve?
Ddev Plastiks says the additions are intended to serve wires and cables demand, including infrastructure, construction, industrial projects and power-sector activity. Wires and cables accounted for 80% of H1FY27 revenue, while polyethylene products contributed 88% of revenue by product category and overseas markets contributed 29% of Rs 1,968 crore of H1FY27 revenue.
Management says HFFR is expected to replace PVC house-wiring cables and is mandated for malls, metro stations, hospitals, schools and other public areas. It also identifies solar cables as an HFFR application. These are stated demand drivers, rather than reported sales volumes for the newly expanded HFFR line, which operated at 45% in Q2FY27.
For XLPE, Ddev Plastiks says the Bhiwadi expansion will support geographic expansion and rising demand. Its portfolio includes polyethylene compounds for 66-72 kilovolt cables and 132-kilovolt cables, and management identifies 220-kilovolt products as its next focus. The company also reported third-party approval for locally produced water-tree-retardant XLPE insulation compounds.
What are Ddev Plastiks' capacity and financial targets?
Ddev Plastiks' FY27E presentation indicates approximately 332,400 MTPA of installed capacity, approximately Rs 3,800 crore of topline and approximately Rs 175 crore of capital expenditure. These are management estimates, whereas reported installed capacity as of September 2026 was 316,400 MTPA.
The proposed FY27E capacity would be approximately 16,000 MTPA above the September 2026 reported level. Management says it plans staggered brownfield expansion of existing facilities over the next three years, while noting that new capacities were added in FY26 and April 2026.
Reported financial performance provides context for the expansion. H1FY27 revenue from operations was Rs 1,968 crore, up 36% year on year according to management commentary, and earnings before interest, tax, depreciation and amortisation (EBITDA) were Rs 187 crore with a 10% margin. The EBITDA margin was below FY26's 11%, while revenue per tonne increased to Rs 1,92,626 in Q2FY27 from Rs 1,45,136 in FY26.
Conclusion
Ddev Plastiks has expanded its manufacturing base to 316,400 MTPA, led by the 48,000-MTPA Bhiwadi XLPE plant. The additional capacity coincided with a lower reported utilisation rate, with group utilisation at 63% in Q2FY27 and Sioplas, XLPE and semiconducting-compound utilisation at 64%, compared with 89% in Q4FY26.
The next measures to watch are utilisation of the 214,500-MTPA Sioplas, XLPE and semiconducting-compound segment, progress toward management's approximately 332,400-MTPA FY27E capacity estimate, and the planned approximately Rs 175 crore of FY27 capital expenditure. Management says further investment in capacity, automation and operating efficiency is intended to address infrastructure, electrification and manufacturing demand.


