Jai Balaji targets lower costs through integrated assets
Key highlights
- Jai Balaji lists 908,000 tonnes of sinter capacity, 350,000 tonnes of coke capacity and 101.1 megawatts of power capacity as of March 2026.
- Jai Balaji plans a 600,000-tonne iron-ore beneficiation plant for low-grade iron-ore dump material.
- Jai Balaji says it has three railway sidings and requires about three tonnes of raw material for every tonne of steel.
- Jai Balaji increased TMT capacity by 40,000 tonnes to 300,000 tonnes through debottlenecking capital expenditure.
powered by IRIS

As of March 2026, Jai Balaji Industries Limited is targeting lower steel costs through 908,000 tonnes of sinter capacity, a planned 600,000-tonne iron-ore beneficiation plant and three railway sidings. The company says rail logistics can reduce costs because about three tonnes of raw material are required to produce one tonne of steel.
Know Jai Balaji Industries inside out
Results, valuation, peers and who's buying, in one view.
How does Jai Balaji's integrated production setup reduce costs?
Jai Balaji’s integrated setup is intended to reduce reliance on outside intermediate supplies by combining raw-material preparation, coke and power assets with steelmaking operations. Its backward-integrated capacity, reported for March 2026, includes 908,000 tonnes of sinter, 350,000 tonnes of coke and 101.1 megawatts of power capacity. The presentation identifies these assets as part of its fully integrated operations rather than quantifying a saving per tonne.
The company’s intermediate-product capacity includes 345,000 tonnes of sponge iron, 394,000 tonnes of steel billets and 550,000 tonnes of pig iron. These stages link the sinter, coke and power base to downstream steel products, giving Jai Balaji internal capacity across several production steps. The source does not state what proportion of each input is consumed internally or purchased from third parties.
Jai Balaji has 300,000 tonnes of TMT bar capacity after debottlenecking capital expenditure increased capacity from 260,000 tonnes. That is an increase of 40,000 tonnes, or about 15%, within the downstream chain. Management says its low-cost capacity-expansion plans are meant to create economies of scale and operational efficiencies, but it has not disclosed a timetable or financial savings target for those plans.
Where are Jai Balaji's integrated assets located?
Jai Balaji’s largest disclosed operating clusters are in Rajbandh, Burdwan, West Bengal, where Unit III and Unit IV combine major upstream and downstream facilities. Unit III has 549,500 tonnes of blast-furnace pig iron capacity, 550,000 tonnes of ductile iron pipe capacity, 908,000 tonnes of sinter capacity and 36,000 tonnes of ferro-alloys capacity. This unit therefore brings sinter preparation, pig iron production and pipe manufacturing together at one location.
Unit IV at Rajbandh contains 120,000 tonnes of sponge iron capacity, 294,030 tonnes of steelmaking capacity, 300,000 tonnes of TMT capacity and 350,000 tonnes of coke capacity. It also has 100,000 tonnes of ferro-alloys capacity and 70 megawatts of captive power. Compared with Unit III, Unit IV carries the group’s listed coke capacity and its largest individual power installation, while Unit III has the larger sinter, pig iron and ductile iron pipe facilities.
The other plants add capacity in West Bengal and Chhattisgarh. Unit I at Baktarnagar has 105,000 tonnes of sponge iron capacity, 30,118 tonnes of ferro-alloys capacity and 18.3 megawatts of power, while Unit V at Rasmada has 100,000 tonnes of steelmaking capacity, 120,000 tonnes of sponge iron capacity and 12.8 megawatts of power. Unit II in Durgapur has a 1,200-tonne OPVC pipe plant, adding a separate pipe product to the portfolio.
Got a follow-up? Ask IRIS
What is Jai Balaji's ore-beneficiation cost plan?
Jai Balaji plans to use a 600,000-tonne iron-ore beneficiation plant to process low-grade iron-ore dump material. Management lists the plant as one of its cost-reduction strategies, alongside low-cost capacity expansion and lower interest rates on secured loans. The presentation does not disclose the project’s capital cost, commissioning date, recovery rate or expected ore-cost saving.
The planned beneficiation capacity is smaller than Jai Balaji’s 908,000 tonnes of sinter capacity, but the two assets address different points in the raw-material chain. Beneficiation is intended to improve low-grade iron-ore dump material, while sinter is listed as a backward-integrated production capacity. The source does not state how much beneficiated ore would be used in the company’s own plants, sold externally or routed to a specific unit.
Jai Balaji also says it has negotiated lower interest rates on secured loans and that high-cost term debt is reducing consistently. This measure affects financing cost rather than the physical cost of steelmaking, but management includes it in the same cost-reduction strategy. In Q2FY27, finance cost was Rs 15 crore, unchanged from Q2FY26 and up from Rs 14 crore in Q1FY27.
Why do Jai Balaji's three railway sidings matter?
Jai Balaji says its three railway sidings can lower logistics costs by shifting raw-material movement from road transport to rail. The company has dedicated sidings at the Odisha loading point and at the unloading point at its plant. It says this arrangement also improves flexibility in delivering finished goods and reduces turnaround time.
The logistics claim is material to the company’s stated input requirements because Jai Balaji estimates that about three tonnes of raw material are needed to make one tonne of steel. A rail-based system can therefore affect transport across a larger physical volume than finished-steel output alone. However, the presentation does not provide a rail-versus-road freight-rate comparison, annual rail volume or a rupee value for the claimed savings.
The sidings support both inbound and outbound movements in the company’s description. Odisha loading supports dispatch of raw materials, plant unloading supports receipt by the production network, and the company cites finished-goods delivery flexibility as a further benefit. Those logistics links serve a product chain with 345,000 tonnes of sponge iron, 394,000 tonnes of billets and 300,000 tonnes of TMT capacity.
Conclusion
Jai Balaji’s cost plan combines integrated steelmaking assets, capacity expansion, beneficiation of low-grade ore, debt-rate negotiations and rail logistics. Its disclosed physical base includes 908,000 tonnes of sinter capacity, 350,000 tonnes of coke capacity and 101.1 megawatts of power capacity, while the three sidings address a supply chain requiring roughly three tonnes of raw material per tonne of steel.
The next items to watch are progress on the planned 600,000-tonne beneficiation plant and management’s stated reduction of high-cost term debt. Jai Balaji has outlined the mechanisms behind its cost strategy, but it has not disclosed a beneficiation commissioning date, a logistics-savings figure or a per-tonne cost-reduction target.


