Happy Forgings secures Rs 300 crore annual order to 2033
Key highlights
- Happy Forgings has secured a roughly Rs 300 crore-a-year data-centre order through 2033.
- Management aims to close nearly Rs 500 crore of additional heavy-forging orders by March of FY2027.
- The Rs 650 crore project had received Rs 300 crore of investment, while the Rs 150 crore vertical-upsetter line was already booked.
- H1 FY2027 revenue rose 29.9% year on year to Rs 950 crore and EBITDA rose 35.5% to Rs 294 crore.
powered by IRIS

Happy Forgings Limited has secured a roughly Rs 300 crore-a-year order for large data-centre applications through 2033, while management aims to close nearly Rs 500 crore of additional heavy-forging orders by March of financial year (FY) 2027. The secured programme is tied to dedicated machining capacity, while the new hammer line can supply several heavy-industrial sectors.
Know Happy Forgings inside out
Results, valuation, peers and who's buying, in one view.
What data-centre order visibility has Happy Forgings disclosed?
Happy Forgings has secured orders of roughly Rs 300 crore a year for large data-centre applications through 2033. Management said the customer had also invested in the related plant, supporting its stated visibility for the programme. The business relates to heavy-engine components and dedicated machining lines rather than the entire capacity of the new heavy-forging project.
Management clarified that the Rs 300 crore figure is annual, after an analyst asked whether it covered several years. It also said the contract had been signed off roughly until 2033. That distinguishes the disclosure from a one-time order-book value and gives an annual value attached to the data-centre programme.
Management gave a separate estimate of roughly Rs 250 crore for machining lines in one response, while later describing Rs 200 crore of machining capex within the Rs 500 crore heavy-components programme. Both statements linked roughly Rs 300 crore of secured orders to data-centre machining. The transcript does not reconcile the difference between the two machining-capex figures.
How much additional heavy-forging business does Happy Forgings target?
Happy Forgings aims to close nearly Rs 500 crore of orders for the heavy-forging line by March of FY2027. Management said almost Rs 1,000 crore of potential new orders were under discussion, but customers were waiting for the company to demonstrate capability before making commitments. The Rs 500 crore figure is therefore a management target rather than secured business.
The company said equipment had arrived and cold trials were expected in January and February, followed by hot trials in March. Full trials on the forging lines are planned in the fourth quarter of FY2027, with sample submissions scheduled for FY2028. Management said this timetable had not changed from its prior plan.
Happy Forgings has factored revenue from the heavy-forging project only in the third and fourth quarters of FY2028. The timing separates the contracted data-centre machining programme from the hammer line, where business conversion still depends on trials, samples and customer approvals.
Got a follow-up? Ask IRIS
Which markets can Happy Forgings serve beyond data centres?
Happy Forgings says the Rs 300 crore hammer line is fungible and can forge components from 300 kilograms to 3 tonnes. Management identified large engines, gas engines, oil and gas, wind, marine applications, large mining trucks, railways and defence as possible markets. Data centres are consequently one use for the equipment rather than the line's sole end market.
The hammer line is expected to add almost 2,000 tonnes of monthly capacity. At realisations of up to Rs 800 per kilogram for machined products, management estimated an annual opportunity of roughly Rs 1,600 crore to Rs 1,800 crore from that capacity. This was a capacity-based estimate, not a forecast of orders or revenue.
The Rs 150 crore vertical-upsetter investment is separate from data centres and is already booked, according to management. It is intended for North American farm-equipment requirements of about 500 to 600 horsepower and wind-turbine products. Management named Bonfiglioli and Liebherr among customers it already serves and said development work had begun.
How does the heavy-forging plan fit Happy Forgings' growth and funding?
Happy Forgings reported revenue of Rs 501 crore in the second quarter (Q2) of FY2027, up 32.7% year on year, and Rs 950 crore in the first half (H1) of FY2027, up 29.9%. Q2 growth combined a 24.8% increase in volumes and a 6.3% increase in realisations, compared with H1 volume growth of 24% and realisation growth of 4.8%.
Earnings before interest, tax, depreciation and amortisation (EBITDA) rose 35.5% year on year to Rs 294 crore in H1 FY2027, while profit after tax rose 35.8% to Rs 189 crore. The H1 EBITDA margin was 30.9%, compared with 30.6% in Q2 FY2027. Management said full-year profitability margins could remain roughly similar to FY2026 because of raw-material and shipment-cost pressure.
Happy Forgings had invested Rs 300 crore of the Rs 650 crore project capex by the call date. Management expected about Rs 50 crore more spending in the current year and the balance in the following year. For the separate Rs 500 crore expansion, it proposed a bank-debt sanction of up to Rs 300 crore, although management said actual use could be lower as spending would extend over about one-and-a-half to two years.
The funding plan includes Rs 350 crore of cash and liquid reserves at H1 FY2027. Operating cash flow was about Rs 124 crore in the first half, affected by higher receivables and Rs 35 crore of advance payments to raw-material suppliers. Management expects working-capital movements to normalise over the full year.
Conclusion
Happy Forgings has disclosed a specific data-centre programme worth roughly Rs 300 crore annually through 2033, linked to machining lines for heavy-engine components. Its wider Rs 650 crore investment is more diversified: Rs 150 crore is allocated to a booked vertical-upsetter line, while the Rs 300 crore hammer line can serve wind, oil and gas, marine, mining and other heavy-industrial applications.
The next milestones are cold trials in January and February, hot trials in March, and management's target to close nearly Rs 500 crore of hammer-line orders by March of FY2027. Investors can also watch FY2028 sample submissions and management's plan for meaningful heavy-forging revenue to begin in the third and fourth quarters of FY2028.


